Mark,
Could you pls also send me a copy of CISCO trapd.conf script? I
also need it for my runnning environment!
Tanks!
Michael Tsai
ITAP-SSR-RS/6000 & AIX,
Availability Service
IBM Taiwan Corporation,
206, Sec. 1, Keelung Rd., Taipei, Taiwan, R.O.C.
Tel: 886-2-7259365, Fax: 886-2-7201499
Notes ID: MICTSAI/Taiwan/IBM, Internet ID: mictsai@tw.ibm.com
Mark van Kerkwyk <kerkwyk@COMTECH.COM.AU> on 99/01/06 04:27:11 AM
Please respond to Discussion of IBM NetView and POLYCENTER Manager on
NetView <NV-L@UCSBVM.UCSB.EDU>
To: NV-L@UCSBVM.UCSB.EDU
cc: (bcc: Michael Tsai/Taiwan/IBM)
Subject: Re: Cisco Traps: Trap found with no known format in trapd.conf
James is correct, there is a script from Cisco which already has the all
of
the addtrap commands in it for all Cisco traps.
If you can't find it, send me a note and I'll forward you a copy of it.
Shouldn't be too hard to find, search for Netview on Cisco's site.
Mark
James Shanks <James_Shanks@TIVOLI.COM> on 06/01/99 05:42:51
Please respond to Discussion of IBM NetView and POLYCENTER Manager on
NetView <NV-L@UCSBVM.ucsb.edu>
To: NV-L@UCSBVM.ucsb.edu
cc:
Subject: Re: Cisco Traps: Trap found with no known format in
trapd.conf
My understanding is that you can get a large addtrap script from Cisco
support which will add all their traps to trapd.conf. I thought you
could
just download it from their website, but perhaps my information is old.
Can anyone confirm this?
Failing that you could try running mib2trap against the MIBs you have
and
see if it will create small addtraps scripts for you. You would then
run
these to update trapd.conf. I am assuming you have NetView V5.1.
James Shanks
Tivoli (NetView for UNIX) L3 Support
Jeff Singer <JSinger@METRICOM.COM> on 01/05/99 01:46:31 PM
Please respond to Discussion of IBM NetView and POLYCENTER Manager on
NetView <NV-L@UCSBVM.UCSB.EDU>
To: NV-L@UCSBVM.UCSB.EDU
cc: (bcc: James Shanks)
Subject: Cisco Traps: Trap found with no known format in trapd.conf
I am getting a large number of traps from cisco routers that are not
defined
in trapd.conf. I have loaded a large number of the cisco snmpv1 mibs
from
their website. Do the mibs contain the trap information as well ?
Where
can I get the information to load into trapd.conf. I am getting a
variety
of traps, not just one trap over and over. Here is one of the traps I
get
repeatedly:
Specific:1
Generic: 6
Category: Status Events
Enterprise: 1.3.6.1.4.1.9
Source: Source Not Known
Hostname: ciscorouter
*************************************************************
* Jeffrey H. Singer Phone: 408-399-8257 *
* Network Engineer Email: jeff.singer@metricom.com *
* Metricom, Inc. Web: http://www.metricom.com *
*************************************************************
|