I sent a note to Jane and the issue has been raised with development.
We have not yet gotten a meaningful response, but they're looking at
it. The IBM hardware code developers, in France, are also looking at
it.
The second part of the message, about removing the subnet, is not one
I've seen specifically related to ATM, but would suggest that the SMIT
or Framework options for resolving database inconsistencies and
compressing the topology and object databases might be run to try to fix
an orphan.
And for further clarification about Leslie's customer going out to get a
media blade for his hub- He has a DMM hardwired to his controller, so
the CPSW will not assume mastership of the chassis. His options are
either to replace the controller with one without an ADMM or get a lan
media port if he wants to manage the chassis. This is not related to
the polling issue raised by Jane.
(Leslie- did you get two copies of this- one to the Forum, one to your
IBM ID?)
Jim Kellock
jkellock@us.ibm.com
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
Leslie Clark wrote:
>
> I just had one of those, too. Are the hubs atm-only, with no DMM, so no Hub
> view? I was also
> seeing red hubs in the ATM topology. I started talking to support about
> this, and then the
> customer decided to pursue getting a DMM in those hubs first (needs an
> ethernet or tokenring
> blade, apparently.) So the problem is on hold for now. Nways support would
> probably be
> interested in hearing from you.
>
> Cordially,
>
Leslie A. Clark
> IBM Global Services - Systems Mgmt & Networking
>
> I have 7 8260s being managed by Nways 1.2.2. My ATM polling default is
> set to 10 minutes. Every 20 minutes my nettl log shows that each 8260 is
> showing an error from ahmtopod with the following:
> File AHMTopoSnmpFsm.C (line 653):
> Polling Not Completed: Snmp Error 1002 (RC 2). IpAddress: <correct ip
> addr here> State: 1 of AHM_TopoInventoryPolling
>
> I am also seeing a number of nettl entries, again from ahmtopod with the
> message:
> Impossible to remove Subnet 0 from SubnetList: not found
>
> Community names are fine on these boxes - does anyone have any
> suggestions?
> Thanks,
> Jane
> --
> Tivoli Certified Consultant
> Skills 1st Limited, 2 Cedar Chase, Taplow, Bucks, SL6 0EU, UK
> Tel: +44 (0)1628 782565
> Copyright (c) 1999 Jane Curry <jane.curry@skills-1st.co.uk>. All rights
> reserved.
|