Franciscus,
If you are concerned with many Tivoli products, you may subscribe to
tme10@list.us.net, which (unfortunately?) does not talk about NetView.
For more details, visit :
http://www.us.net/majordomo/majordomo.basic.html.
Regards.
Bernard
--
Bernard Envain
CIC-Banque Scalbert-Dupont
Dpt Informatique
Ph. : +33 3 20 12 60 47
Fax : +33 3 20 12 60 80
Philip Guerra wrote:
>
> This is a TME error and not Netview. The distribution of the Distributive
> Monitoring profile was not completed. From what you have included below, it
> looks like the gateway did not receive anything back from the endpoint to
> indicate completion of the distribution. Things you can check are the
> repeater settings on the gateway. When you created the gateway on your
> ManagedNode, it also became a repeater. Check the Framework Reference Manual
> for the parameters. Tune your repeater to something conservative with
> regards to the network capacity. AAlso, using the wgateway command, check
> the timeout variable. By default it is 300 seconds, Dependiong on your
> network, you may need to increase it. Is the endpoint connected to the
> network on a slow link. Has your endpoint even logged into the gateway? If
> you are unsure, use Netscape to connect to the endpoint and check the
> logfile. In the address field for your browser type: ws95:9494 and then
> click the link to the logfile. If the endpoint has logged in, try doing:
> wadminep ws95 view_config_info and see if it returns any info. If this
> command is successful, try redistributing the profile.
>
> Philip Guerra
> Senior TME Deployment Engineer
> IT-Austin
> Tivoli Systems, Inc.
>
> Fransiscus Wahyu wrote:
>
> > I have a problem about Tivoli Distribute Monitor ,
> > I have already installed Tivoli Framework 3.6, Tivoli Dist Monitor 3.6,
> > Create Gateway and Install Win95 Endpoint.
> > After that I create Dataless Profile Manager and create profile to check
> > Win95 Endpoint.
> > After I distribute that profile to Win95 Endpoint there came out error :
> > " Distribute faile for some subscribers :
> > -> Distribute of profile "Win95" failed for some subscribers:
> > -> Distributed failed for subscriber 'ws95':
> > -> recv_session : timeout(300seconds) waiting to receive from
> > 10.2.6.10+9494"
> >
> > What's wrong with that.
> > May be someone can help us
> >
> > TIA
> > Wahyu
> > United Tractors
--
Bernard Envain
CIC-Banque Scalbert-Dupont
Dpt Informatique
Ph. : +33 3 20 12 60 47
Fax : +33 3 20 12 60 80
|