Gil Irizarry wrote:
>
> Vladimir:
> I am able to execute the script from the command line OK, however, I
> have put it in inittab and after rebooting it does not autolog the user
> id onto the console. I issued the telinit 4 ( where 4 is the run level
> in unittab for my script) and it is generating a message "security is
> off". What do you recommend?
> The reason I want this, is so after my backup & reboot on Sundays at 1:
> AM, the browser would be available to the techs dialing in from home.
> Gil Irizarry
>
> >>> Vladimir Petr <petr@DATASYS.CZ> 04/28 6:01 AM >>>
> "De Beer, Michael" wrote:
> >
> > Thanx Petr
> >
> > The OS I'm running is AIX4.2.1 & Netview 5.1 & what we are trying to
> do
> > is
> > get a particular map up on the box, under root user, so that when the
> > web-server comes up, as I understand it, this will be the first map it
> > grabs. We tried to find a rc.local file on the system but had no luck
> > (should we be looking for something else ? ).
> >
> > Regards Mike
> >
> > -----Original Message-----
> > From: Vladimir Petr [mailto:petr@DATASYS.CZ]
> > Sent: Monday, April 26, 1999 12:11 PM
> > To: NV-L@UCSBVM.ucsb.edu
> > Subject: Re: Netview startup
> >
> > "De Beer, Michael" wrote:
> > >
> > > Hi
> > >
> > > Is it possible to start a netview map i.e.. default map at boot-up
> > time,
> > > with root user on the console, without root actually signing on the
> > > console,
> > > in other words, when the box comes up after a re-boot, it bypasses
> the
> > > GUI
> > > login screen and automatically starts the root map GUI. Any help
> would
> > > be
> > > appreciated.
> > >
> > > regards
> > >
> > > Michael de Beer
> > > Network Management Analyst
> > > +2711 889-4610 (work)
> > > +2711 889-5293/4355 (fax)
> > > +2782 338 2080 (mobile)
> >
> > Hello, Michael;
> > I hope you know what you are trying to do, for this might compromise
> > security at
> > your site.
> > For instance, add the following to your rc.local startup file (not
> sure
> > which
> > platform you are running NV on):
> >
> > /usr/bin/su - <userid> -c "nvauth -login <nv_userid> <nv_groupid> \
> > <password>; netview&"
> >
> > This assumes you have security turned on and NV daemons running. Also,
> > the
> > user
> > environment must be set in the .profile file. Otherwise, use full
> paths
> > to
> > the
> > binaries.
> > For password, better not to enter it in the script but rather read it
> > from a
> > file (readable only by its owner) through
> > $(/usr/bin/cat <password_file>)
> > or redirect STDIN from the file.
> >
> > You can set the map to open through the netview command or let the
> > default
> > map
> > for that user show up. See manual for netview and su for options. :-)
> >
> > HTH,
> > Best regards,
> > Vladimir.
> >
> > --
> >
> ------------------------------------------------------------------------
> > ----
> > --
> > "The lyf so short, the craft so long to lerne." Chaucer.
>
> Hello, Mike;
> As far as I know rc.local is not created by OS installation. It is
> created later
> if there is a need to start some processes at boot time (it can be named
> howsoever you want). Ususally, it's placed in /etc. After you have this
> script,
> you must modify /etc/inittab to execute it.
>
> However, as I realized later, there must be a user logged in to the box
> in order
> for ovw to start up. Otherwise, there will be dtlogin window and ovw
> will have
> no display and no environment. And as you know, Unix does not read
> password from
> redirected STDIN.
>
> So the simplest way is to add that command I mentioned in the previous
> posting
> to the selected user's .kshrc/.profile file so that when this particular
> user
> logs in the command will be executed and ovw shows up the map you
> desire. If you
> want this user to be root, add the command to his/her $HOME/.kshrc. You
> can run
> the netview command under any userid you want by means of su.
>
> Hope this helps,
> Best regards,
> Vladimir.
> --
> ------------------------------------------------------------------------
> ------
> "The lyf so short, the craft so long to lerne." Chaucer.
Hi, Gil,
Unix does not allow you to avoid login as far as I know. Hence, you must use
user's profile file to run the command after the user has logged in. I
understand it would be useful for you to have autologin but as it seems you must
log in to the box manually. And maybe if you realized what could then follow,
you would never like it. :-)
Best regards,
Vladimir.
--
------------------------------------------------------------------------------
"The lyf so short, the craft so long to lerne." Chaucer.
|