Guys
We were also told by Cisco that Strataview+ should run on its own server as
uses all the resources in the machine. Unless they have done something about
this issue and provided what we were told is true, running Strataview+ and
Netview together might actually be a bad idea.
Please let me know what you think. Anybody out there running Netview and
strataview+ on the same box?
Thanks
Phil
> -----Original Message-----
> From: Robert Schneider [SMTP:rschneider@METLIFE.COM]
> Sent: Saturday, 1 May 1999 0:38
> To: NV-L@UCSBVM.ucsb.edu
> Subject: Re: AIX-Netview & strataview plus
>
> Yes, that is what I am being told...
>
>
>
>
> "Prokott, Joe" <Joe.Prokott@WESTGROUP.COM> on 04/28/99 03:23:58 PM
>
> Please respond to Discussion of IBM NetView and POLYCENTER Manager on
> NetView
> <NV-L@UCSBVM.ucsb.edu>
>
> To: NV-L@UCSBVM.ucsb.edu
> cc: (bcc: Robert Schneider/Bsg/MetLife/US)
> Subject: Re: AIX-Netview & strataview plus
>
>
>
>
> We have SV+ 9.1.6 on HP OV 5.1. We are not aware of any version of SV+
> that
> can run under a current version (5.X) of NV. It seems like they have been
> emphasizing the OV platform first in their releases. So, is Cisco saying
> that SV+ 9.1.X will run on NV 5.1.1 in June?
>
> Joe Prokott - West Group
> Network Architect
> 610 Opperman Drive
> St. Paul, MN 55123
> Phone: 651-687-4536
> Fax: 651-687-6946
> E-mail: joe.prokott@westgroup.com
>
>
> -----Original Message-----
> From: Robert Schneider [mailto:rschneider@METLIFE.COM]
> Sent: Wednesday, April 28, 1999 12:44 PM
> To: NV-L@UCSBVM.UCSB.EDU
> Subject: Re: AIX-Netview & strataview plus
>
>
> We too are planning to run SV+ with NV5.1.1, but we are being told the
> product
> is not production ready yet. We're hearing sometime in June...
>
>
>
>
> Maria Gewrgiadou <okyalos@HOTMAIL.COM> on 04/28/99 08:37:34 AM
>
> Please respond to Discussion of IBM NetView and POLYCENTER Manager on
> NetView
> <NV-L@UCSBVM.ucsb.edu>
>
> To: NV-L@UCSBVM.ucsb.edu
> cc: (bcc: Robert Schneider/Bsg/MetLife/US)
> Subject: AIX-Netview & strataview plus
>
>
>
>
> Hi all,
>
> In my organization we have setup an AIX server with 4.3.2
> and installed the Netview 5.1.1 .
>
> Our network consists of Cisco IGX switches and Motorola 65xx routers.
> We want to be able to manage these devices with snmp, so we plan
> to install the Cisco Wan Manager (Strataview+) and the Motorola
> 9000oms.
>
> Has anyone install these products ?
> What hardware platform was used ?
> Did you had any problems ?
>
> Thanks in advance
>
>
> ______________________________________________________
> Get Your Private, Free Email at http://www.hotmail.com
**********************************************************************
CAUTION: This Message may contain confidential information intended
only for the use of the addressee named above. If you are not the
intended recipient of this message you are hereby notified that any
use, dissemination, distribution or reproduction of this message is
prohibited. If you received this message in error please notify
Mail Administrators immediately. Any views expressed in this
message are those of the individual sender and may not necessarily
reflect the views of Woolworths Ltd.
**********************************************************************
|