Re: Messages are not making it to Netview events display.

[Steve Pirollo <spirollo@SUNGARD.COM>]

Thanks everyone,

     The messages are back.  I reconfigured nvtrapd-trap back to 162/udp.






Mark Sklenarik <Mark_Sklenarik@TIVOLI.COM> on 06/04/99 02:06:30 PM

Please respond to Discussion of IBM NetView and POLYCENTER Manager on NetView
      <NV-L@UCSBVM.UCSB.EDU>

To:   NV-L@UCSBVM.UCSB.EDU
cc:    (bcc: Steve Pirollo/SCS/SunGard)
Subject:  Re: Messages are not making it to Netview events display.




If you stopped or shutdown Optivity than you will have to change
 nvtrapd-trap   412/udp   # Netview traps monitor trap port
back to
 nvtrapd-trap   162/udp   # Netview traps monitor trap port
in-order for trapd to get traps from remote agents.  You will have to
recycle trapd, which means you have to exit all NetView GUI's and recycle
basically all the deamons, since must depend on trapd.

If Optivity, is running, than 412 is the correct value for nvtrapd-trap.
The problem is within Optivity trap processor utility, (sorry do not know
the name of the Optivity processor of traps).

Thanks Mark Sklenarik
.
Tivoli NetView Product Integrity
.
Bldg 503, 4205 South Miami Blvd, Durham, NC 27709
Email: mark.sklenarik@tivoli.com              Http: www.tivoli.com
Tele: (919)-543-3571   Tieline: 441-3571   Fax : (919)-543-2693



Steve Pirollo <spirollo@SUNGARD.COM> on 06/04/99 01:01:01 PM

Please respond to Discussion of IBM NetView and POLYCENTER Manager on
      NetView <NV-L@UCSBVM.UCSB.EDU>

To:   NV-L@UCSBVM.UCSB.EDU
cc:    (bcc: Mark Sklenarik/Tivoli Systems)
Subject:  Re: Messages are not making it to Netview events display.





Hi Mark,

     Yes, Optivity is installed and I did think of this an shut it down.
No
change.    /etc/services has the following in this order

     snmp-trap 162/tcp        # SNMP monitor trap port
     snmp-trap 162/udp   # SNMP monitor trap port
     nvtrapd-trap   162/tcp        # Netview trapd monitor trap port
     nvtrapd-trap   412/udp   # Netview traps monitor trap port
     nvtrapd-client 1661/tcp  # tNetview trapd client application prot







Mark Sklenarik <Mark_Sklenarik@TIVOLI.COM> on 06/04/99 10:33:30 AM

Please respond to Discussion of IBM NetView and POLYCENTER Manager on
NetView
      <NV-L@UCSBVM.UCSB.EDU>

To:   NV-L@UCSBVM.UCSB.EDU
cc:    (bcc: Steve Pirollo/SCS/SunGard)
Subject:  Re: Messages are not making it to Netview events display.




Steve,
Are you running any other software that might be listing to snmp-trap port
162?  Like Optivity?
Check the /etc/services file, what is port in nvtrapd-trap udp and tcp set
to?  is it 162?

Thanks Mark Sklenarik
.
Tivoli NetView Product Integrity
.




Steve Pirollo <spirollo@SUNGARD.COM> on 06/04/99 10:14:12 AM

Please respond to Discussion of IBM NetView and POLYCENTER Manager on
      NetView <NV-L@UCSBVM.UCSB.EDU>

To:   NV-L@UCSBVM.UCSB.EDU
cc:    (bcc: Mark Sklenarik/Tivoli Systems)
Subject:  Re: Messages are not making it to Netview events display.





James,
     I tried opening another event window (dynamic) and no luck.  I tried
changing some of the events to (N netmon) and no luck there either.  After
future investigation it looks like I am not receiving traps from any
devices.
When I made a reference to, only events with - N (Netmon) are displaying,
it
dawned on me, and correct me if I am wrong,  these messages are coming from
NETMON polling devices (outbound).    Does anyone have any other ideas?








James Shanks <James_Shanks@TIVOLI.COM> on 06/02/99 12:34:33 PM

Please respond to Discussion of IBM NetView and POLYCENTER Manager on
NetView
      <NV-L@UCSBVM.UCSB.EDU>

To:   NV-L@UCSBVM.UCSB.EDU
cc:    (bcc: Steve Pirollo/SCS/SunGard)
Subject:  Re: Messages are not making it to Netview events display.




OK, so you have events listed in the trapd.log that don't show in an events
window.  Do any events show or just a select few are not displayed?   If it
is a few, then use xnmtrap to start the GUI for customizing events, find
those events, and see whether they are listed as "Log Only".  If they are,
then change them to another type.

James Shanks
Tivoli (NetView for UNIX) L3 Support



Steve Pirollo <spirollo@SUNGARD.COM> on 06/02/99 11:58:07 AM

Please respond to Discussion of IBM NetView and POLYCENTER Manager on
      NetView <NV-L@UCSBVM.UCSB.EDU>

To:   NV-L@UCSBVM.UCSB.EDU
cc:    (bcc: James Shanks/Tivoli Systems)
Subject:  Messages are not making it to Netview events display.





Hello,

     I have an issue with SNMP events not displaying in Netview Events
window
and I do not know what I did that made to happen.    I've checked
SYSLOG.LOG,
NMSLOG, and trapd.log and the messages are there.    Anyone have any ideas
where I can look.  Thanks