Karin:
Thank you for the response. I removed the external DNS lookup and the problem
went away.
What should the oid_to_type entry look like? And do I have to modify any other
members?
In Netview the OID associated with the RSM is 1.3.6.1.4.1.9.1.168. Is this
correct for HSRP?
Thanks in advance
Gil Irizarry
>>> Karin Binder <karin.binder@nwa.com> 06/23 12:09 PM >>>
Hello Gil,
I saw similar symptoms on the symbols for our Cisco routers running HSRP
(Hot Standby Routing Protocol) when running NetView 5.1 on AIX 4.3.2. I'm
not sure what version you're running. Our problems were fixed in NetView
5.1.1.
Other thoughts:
1) oid_to_type flags: Do you have the 'S' flag set for devices using HSRP?
2) DNS: are the DNS forward/reverse definitions using the HSRP address?
This could confuse discovery/config checks.
----------
> From: Gil Irizarry <IRIZARRG@LABS.WYETH.COM>
> To: NV-L@UCSBVM.UCSB.EDU
> Subject: Cisco Cat5500-RSM
> Date: Wednesday, June 23, 1999 10:47 AM
>
> Hi All:
> I have 2 Cisco Cat 5500 with RSM cards & variable net mask
255.255.252.0. NETMON discovers the IP addresses, ok. The Event display
window shows Added and 10 minutes later it shows Deleted for the same
interfaces. This 2 switches are up all the time and function as backup to
eachother(hot stand by). We are also using vlans.This problem was NOT there
on NV 4.2.1.
> Any ideas?
> Gil Irizarry
>
> Gil Irizarry
> Wyeth-Ayerst Pharmaceuticals
> 280 King of Prussia RD.
> Radnor PA.
> 19087
> Internet:irizarrg@labs.wyeth.com
|