Well, I am not sure of your steps here Bill. Were you ever using forwardall.rs?
If so, then those events might have been in the cache and been sent over when it
finally connected.
TEC should only get what the active ruleset forwards, just like an event window.
So you can create a window running sampcorrNuNd.rs and see just what TEC should
get from that point on.
If you change the ruleset in tecint.conf, then you must either ovstop/ovstrt
nvserverd again to get it to use the new rule,
or you can use the command nvtecia -reload
James Shanks
Tivoli (NetView for UNIX) L3 Support
"McCarter, Bill" <mccarter_we@NNS.COM> on 08/20/99 12:53:28 PM
Please respond to Discussion of IBM NetView and POLYCENTER Manager on NetView
<NV-L@UCSBVM.UCSB.EDU>
To: NV-L@UCSBVM.UCSB.EDU
cc: (bcc: James Shanks/Tivoli Systems)
Subject: Re: Event forwarding to TEC from netview
James,
Thanks for your help.
I did have a large cache file on my netview box. I changed it to point at
my production TEC server and the cache emptied out.
But.....
My question still is shouldn't only node up/down events be forwarded from
Netview to TEC if I say use the sampcorrNuNd.rs rule
when I configure event forwarding. wtdumprl reveals that any event received
by netview is indeed showing up at my TEC server. Which in turn means it's
showing
up on my console,which is set to receive all events from nvserverd. My
tecint.conf file shows the correct settings.
Thank You
Bill
Bill McCarter
Enterprise Systems Management
Newport News Shipbuilding, Dept. OO5
Phone (757) 688-2602
Email mccarter_we@nnscom
> -----Original Message-----
> From: James Shanks [SMTP:James_Shanks@TIVOLI.COM]
> Sent: Friday, August 20, 1999 12:05 PM
> To: NV-L@UCSBVM.UCSB.EDU
> Subject: Re: Event forwarding to TEC from netview
>
> Sending events to TEC is independent of you console. They are sent there
> in
> addition to whatever you see, not instead of.
>
> If you want to see what TEC is getting, go to the TEC console and do
> wtdumprl.
> If you don't see anything there, go back to NetView and see if you have an
> /etc/Tivoli/tec/cache file. If you do, then your NetView is having
> difficulty
> talking to TEC.
>
> James Shanks
> Tivoli (NetView for UNIX) L3 Support
>
>
>
> "McCarter, Bill" <mccarter_we@NNS.COM> on 08/20/99 11:54:18 AM
>
> Please respond to Discussion of IBM NetView and POLYCENTER Manager on
> NetView
> <NV-L@UCSBVM.UCSB.EDU>
>
> To: NV-L@UCSBVM.UCSB.EDU
> cc: (bcc: James Shanks/Tivoli Systems)
> Subject: Event forwarding to TEC from netview
>
>
>
>
> Is there some trick to get the events sent to TEC using a rule set?
> I configure event forwarding through the my tivoli desktop,netview server
> icon. I give it the name of my event server and tell it to use the
> sample Nodeup,Nodedown ruleset,but it still sends everthing to my console
> ????
>
> Thank You
>
> Bill
>
> Bill McCarter
> Enterprise Systems Management
> Newport News Shipbuilding, Dept. OO5
> Phone (757) 688-2602
> Email mccarter_we@nnscom
|