I have added comminity Private on the NT box, I verified TCP/UDP trap
reception , but the status monitor table is still blank. Not sure what
else to check. Thanks
settingsAt 10:27 AM 8/20/99 -0400, you wrote:
>Muni,
>I am running a NT MLM without any problems here.
>You may check the following:
> on netview ensure you have added an entry in the snmp config
for the
>NT box.
> ensure the community name is correct in the snmpd config for set
>community for the NT box
> ensure you are managing the NT box from your netview
> On the MLM:
> under mlm trap reception settings make sure you have enabled both
>TCP/UDP trap receptions.
> check the trap destination table, if your netview hasn't put in his
>address, something is wrong
> check the status monitor table, if not populated by netview,
this is
>bad also
Muni Chatarpal
Senior Network Systems Consultant
International Network Services
Houston Office: (713) 781-0300 Ext 122
EMail: muni@ins.com
EMail Pager:page_muni_chatarpal@ins.com
http://www.ins.com
|