Leslie,
I just wanted to add some detail, to see if the APM would be good for us.
We do not have an MLM. We have a Netview server, and we have several CIP
routers.
For example:
One of the MIB variables, is the tn3270sPuState, which is part of the TN3270
variables used to manageTN3270 servers.
This variable can have a value of 1 thru 8, reflecting the logical state of
the CIP PU.
Value of 7, means an ACTPU was received and acknowleged successfully, i.e.
the PU state is ACTIVE.
Using SNMP collection and thresholds will not help in this situation,
because it is not a simple Threshold situation. (Correct me if I am wrong)
Other than writing a program to solicit the values of the tn3270sPuState,
and then checking all the values and generating an Alert from the program,
are there any functions within Netview , without an MLM implementation, that
could accomplish that? thx, art
-----Original Message-----
From: Leslie Clark [mailto:lclark@US.IBM.COM]
Sent: Tuesday, September 28, 1999 8:46 PM
To: NV-L@UCSBVM.UCSB.EDU
Subject: Re: CISCO CIP Monitoring
I think I just set that up for a customer. They wanted to monitor the status
of a couple of interfaces that matched that description - not IP, but they
do appear in the MIB II Interface table. They have an ifOperStatus that
you can monitor via SNMP. I used the Agent Policy Manager front-end
to MLM on the Netview server, and set up thresholds for the ifOperStatus
variables - >1 is bad, = 1 is the rearm. This facility then added objects
for me to represent those interfaces and they turn red when the router
reports that they are down. You need to know the index number of the
interfaces you want to monitor.
Configuring the APM for the first time is confusing but it is well worth the
effort in my opinion. You get grahics and traps and don't write any code.
Cordially,
Leslie A. Clark
IBM Global Services - Systems Mgmt & Networking
We need to monitor the PU state(on CIP) and channel state for our CISCO
Router CIP cards, providing 3270 access for our network.
I was wondering if anyone has done this, and how they have implemented ths
type of monitoring? That is what channel MIBS did you look at, and how they
set up the monitoring function.
thx,art
|