Hello
The memory paging space depend off the volume group that you are using
forNetview.
You can apply the formula, but all the applications have propertly need, if
you are using a diferent volume group than rootvg, make a pagging space for
that volume, if you are using rootvg apply the formula and control the
pre-post paging space idle.
Gord Michaels wrote:
> Hello All.
>
> I have a question about how to properly compute the amount of paging space
> required for my Netview Server...
>
> Here is what I have installed..
>
> AIX 4.2.1
> Netview 5.1 (recommends 128 Mb memory minimum)
> Framework 3.6 (?)
> Nways 2.0 (recommends 768 Mb of memory)
>
> Each of these applications has its own memory requirements. My questions
> are:
>
> 1. Can the total memory requirement be determined by simply adding the
> memory requirements of each individual application??
>
> 2. In terms of paging space, I have been using the formula:
>
> Paging Space (in MB) = 512 + (memory - 256) * 1.25
>
> Does this formula take into consideration all applications, not just
> Netview, or is this formula only good for Netview?
>
> Basically, I have 2GB of memory, by the formula then, I should have
> 2692 Mb of memory, does this sound right?
>
> Basically, when determining paging space, is it based on the amount of
> memory you have (i.e. formula) OR the apps you have installed?
>
> Any info appreciated.
>
> Sincerely,
>
> Gord Michaels.
>
> ______________________________________________________
> Get Your Private, Free Email at http://www.hotmail.com
aquitian.vcf
Description: Card for Alejandro Quitian
|