i second that, James
-----Original Message-----
From: Gord Michaels [mailto:NV-L@UCSBVM.ucsb.edu]
Sent: Tuesday, November 09, 1999 9:26 AM
To: gord_michaels@HOTMAIL.COM; NV-L@UCSBVM.ucsb.edu
Subject: Re: For your amusement ...
Mistakes happen.
All I know is that I would have been lost without your help over the last
year. Please do not leave this Forum James.
Sincerely,
Gord Michaels.
>From: James Shanks <James_Shanks@TIVOLI.COM>
>Reply-To: Discussion of IBM NetView and POLYCENTER Manager on NetView
> <NV-L@UCSBVM.ucsb.edu>
>To: NV-L@UCSBVM.ucsb.edu
>Subject: For your amusement ...
>Date: Mon, 8 Nov 1999 12:57:28 -0500
>
>OK, so you are a customer with enough of a TCP/IP network to buy and
>install
>NetView for NT. Now can you imagine that you know so little about what you
>are
>doing that you go out to each of your routers and configure them to send
>all
>kinds of traps to NetView, but you have to ask other people what they
>mean?
>
>Why would anyone be silly enough to send traps to NetView if they don't
>know
>what they mean?
>
>James Shanks
>Tivoli (NetView for UNIX) L3 Support
>
>
>
>"Chance, Larry" <lchance@SFBCIC.COM> on 11/08/99 11:58:06 AM
>
>Please respond to Discussion of IBM NetView and POLYCENTER Manager on
>NetView
> <NV-L@UCSBVM.UCSB.EDU>
>
>To: NV-L@UCSBVM.UCSB.EDU
>cc: (bcc: James Shanks/Tivoli Systems)
>Subject: Frame Relay
>
>
>
>
>NetView for NT
>
>Would this trap indicate a physical problem on the serial interface of the
>router
>or is it an LMI status request from the router to the DLCI?
>It makes me think it is the router serial interface since it's DTE.
>Where can I reference the meanings of the Index and State?
>
>TRAP:
>frDLCIStatusChange:trap received from enterprise frame-relay-dte
>with 3 arguments: frCircuitIfIndex=3; frCircuitDlci=100;
>frCircuitState=3
>
>Thanks,
>
>Larry
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
|