Wow, don't UNLIST. I, too, could have easily asked
this question.
Joe
--- "Chance, Larry" <lchance@SFBCIC.COM> wrote:
> I respect your knowledge of NetView. I'm sure
> you're the best.
> You must work with it full-time. I do not. I have
> to manage
> to get by part-time. So my knowledge and experience
> is limited.
>
> I won't apologize for asking questions. I do not
> know everything.
> I do regret that you find this disturbing.
>
> I will UNLIST from this server to make you happy.
>
> I do want to thank those of you that help others and
> don't let it
> disturb you like James Shanks.
>
> Thanks,
>
> Larry
>
>
> > -----Original Message-----
> > From: James Shanks
> [mailto:James_Shanks@TIVOLI.COM]
> > Sent: Monday, November 08, 1999 11:57 AM
> > To: NV-L@UCSBVM.ucsb.edu
> > Subject: For your amusement ...
> >
> >
> > OK, so you are a customer with enough of a TCP/IP
> network to
> > buy and install
> > NetView for NT. Now can you imagine that you know
> so little
> > about what you are
> > doing that you go out to each of your routers and
> configure
> > them to send all
> > kinds of traps to NetView, but you have to ask
> other people
> > what they mean?
> >
> > Why would anyone be silly enough to send traps to
> NetView if
> > they don't know
> > what they mean?
> >
> > James Shanks
> > Tivoli (NetView for UNIX) L3 Support
> >
> >
> >
> > "Chance, Larry" <lchance@SFBCIC.COM> on 11/08/99
> 11:58:06 AM
> >
> > Please respond to Discussion of IBM NetView and
> POLYCENTER
> > Manager on NetView
> > <NV-L@UCSBVM.UCSB.EDU>
> >
> > To: NV-L@UCSBVM.UCSB.EDU
> > cc: (bcc: James Shanks/Tivoli Systems)
> > Subject: Frame Relay
> >
> >
> >
> >
> > NetView for NT
> >
> > Would this trap indicate a physical problem on the
> serial
> > interface of the
> > router
> > or is it an LMI status request from the router to
> the DLCI?
> > It makes me think it is the router serial
> interface since it's DTE.
> > Where can I reference the meanings of the Index
> and State?
> >
> > TRAP:
> > frDLCIStatusChange:trap received from enterprise
> frame-relay-dte
> > with 3 arguments: frCircuitIfIndex=3;
> frCircuitDlci=100;
> > frCircuitState=3
> >
> > Thanks,
> >
> > Larry
> >
>
=====
__________________________________________________
Do You Yahoo!?
Bid and sell for free at http://auctions.yahoo.com
|