Thanks,
But my OS is AIX 4.3.
Gord.
>From: Edvyn.Lek@BANKOFAMERICA.COM
>Reply-To: Discussion of IBM NetView and POLYCENTER Manager on NetView
> <NV-L@UCSBVM.ucsb.edu>
>To: NV-L@UCSBVM.ucsb.edu
>Subject: Re: AW: Tivoli NetView Web integration with CiscoWorks2000
>Date: Thu, 9 Dec 1999 08:06:43 -0800
>
>If the OS for cw2k is not AIX, then it uses 80 instead of 1741 as the port.
>
>
>
>
>
>
>Gord Michaels <gord_michaels@HOTMAIL.COM> on 12/09/99 07:54:45 AM
>
>Please respond to Discussion of IBM NetView and POLYCENTER Manager on
>NetView
> <NV-L@UCSBVM.UCSB.EDU>
>
>To: NV-L@UCSBVM.UCSB.EDU
>cc: (bcc: Edvyn Lek)
>Subject: Re: AW: Tivoli NetView Web integration with CiscoWorks2000
>
>
>
>Thanks for the response.
>
>I have Resource Manager Essentials (CiscoWorks2000) installed on the same
>server as my Netview 5.1.1.
>
>I am trying to place the symbol and link on the Netview Web Interface
>Navigation Bar.
>
>I have placed the Navigation Bar symbols in the correct directory and I
>have
>created and edited the file
>/usr/OV/web/httpd/registration/NavBar/toc_CW2k_Login.txt with the following
>line:
>
>32:32:CiscoWorks2000:CiscoWorks2000:http://10.2.3.56:1741
>
>(Note: The CiscoWorks2000 is using port 1741 for its web server.)
>
>However, when I load up the Netview Web interface and place my cursor over
>the symbol on the Navigation Bar, the I see the following URL:
>
>http://10.2.3.56/TME10/Netview/http
>
>This of course is not the URL I need to access. Does anyone have this
>working, with RME on the same server as Netview, and if so, how did you do
>it?
>
>Any info appreciated.
>
>Sincerely,
>
>Gord Michaels.
>
>
>
> >From: Ernst.Ziegler@RUV.DE
> >Reply-To: Discussion of IBM NetView and POLYCENTER Manager on NetView
> > <NV-L@UCSBVM.ucsb.edu>
> >To: NV-L@UCSBVM.ucsb.edu
> >Subject: AW: Tivoli NetView Web integration with CiscoWorks2000
> >Date: Thu, 9 Dec 1999 08:40:02 +0100
> >
> >Hi,
> >this file does not exist on the AIX box. You have to create a new file
> >with
> >that name and insert the command string
> >--Ernst--
> >
> >
> >Ernst Ziegler
> >R+V Allgemeine Versicherung
> >John-F.Kennedy Str. 1
> >65189 Wiesbaden
> >Tel: +49 611 533 6724
> >Fax +49 611 533 5856
> >email: ernst.ziegler@ruv.de
> >
> >
> >-----Urspr|ngliche Nachricht-----
> >Von: Gord Michaels [mailto:gord_michaels@HOTMAIL.COM]
> >Gesendet am: Mittwoch, 8. Dezember 1999 20:16
> >An: NV-L@UCSBVM.UCSB.EDU
> >Betreff: Tivoli NetView Web integration with CiscoWorks2000
> >
> >Hello All.
> >
> >I am running Netview 5.1.1, AIX 4.3, CiscoWorks2000. I have found this
> >document with instructions on how to integarte Netview with the
> >CiscoWorks2000 Web... BUT, I cannot locate the file
> >diag_CW2k_DeviceCenter.txt anywhere.
> >
> >Has anyone done this before???
> >
> >Sincerly,
> >
> >Gord Michaels.
> >
> >See Doc. below.....
> >
> >Tivoli NetView and Cisco Web Integration
> >
> >Tivoli NetView (all versions) Web integration with CiscoWorks2000
> >
> >These modifications allow the user to launch CiscoWorks2000 from the
>Tivoli
> >NetView Console.
> >
> >Diagnostic Tool Integration
> >
> >1. Edit the file diag_CW2k_DeviceCenter.txt by specifying the name of
>the
> >Essentials server. If you look closely at the file, you will see that it
>is
> >pointing to 'ESSENTIALSSERVER' in the URL path. You will need to edit the
> >file by replacing 'ESSENTIALSSERVER' with the correct server name, where
> >Essentials is running in your network.
> >The file currently reads:
> >CiscoWorks2000 device center enables integration between the diagnostic
> >tools section of Tivoli NetView and the Device Center of CiscoWorks2000.
> >Replace ESSENTIALSSERVER in the path below with the server name or IP
> >address of the CiscoWorks2000 server you want to link to.
> >TRUE
> >32:32:devicecenter:CiscoWorks2000 Device Center:http:// ESSENTIALSSERVER
> >/cgi-bin/common/perl/launchPad/deviceCenter.pl?csUser=autoLogin&DeviceName=
> >%IP Hostname%:_top
> >
> >2. Place the file name: diag_CW2k_DeviceCenter into
> >/usr/OV/web/httpd/registration/Diagnostics
> >
> >3. Place the three diag*.gif files into
> >/usr/OV/web/httpd/hdocs/TME10/NetView/images/icons.
> >
> >Navigation Bar Integration
> >
> >1. Edit the file toc_CW2k_Login.txt by specifying the name of the
> >Essentials server. If you look closely at the file, you will see that it
>is
> >pointing to 'ESSENTIALSSERVER' in the path of the URL. You will need to
> >edit the file by replacing 'ESSENTIALSSERVER' with the correct server
>name
> >where Essentials is running in your network.
> >
> >For example, the file currently reads:
> >CiscoWorks2000 enables link to Login Page from NetView Navigation Bar.
> >Replace ESSENTIALSSERVER in the path below with the server name or IP
> >address of the CiscoWorks2000 server you want to link to.
> >32:32:CiscoWorks2000:CiscoWorks2000:http://ESSENTIALSSERVER:top
> >
> >2. Place the file name: toc_CW2k_Login.txt into
> >/usr/OV/web/httpd/registration/NavBar
> >
> >3. Place the three toc*.gif files into
> >/usr/OV/web/httpd/hdocs/TME10/NetView/images/icons.
> >
> >______________________________________________________
> >Get Your Private, Free Email at http://www.hotmail.com
>
>______________________________________________________
>Get Your Private, Free Email at http://www.hotmail.com
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
|