Hi Gord,
After reading Leslies reply, be shure you have the right
symbols and oid's !
There are separate entries for the 75xx routers, being 7505,
7507 and 7513. The 7000 won't work, because the oid 1.3.6.1.4.1.9.1.8 is
for 7000's only. The 75xx's have oid's 1.3.6.1.4.1.9.1.48 (for 7505),
1.3.6.1.4.1.9.1.45 (for 7507) and 1.3.6.1.4.1.9.1.46 (for 7513).
Hope it helps,
Steven.
Steven Demets
1Sgt
CVILM
Dept Explo
Sec WAN
Tf Bemiltel: 9-2320-6099
Tf Belgacom: +32 2 2556099
Fax Bemiltel 9-2400-3777
Fax Belgacom: +32 2 7013777
email prive: Steven.Demets@village.uunet.be
<mailto:Steven.Demets@village.uunet.be>
email werk: Demets.Steven@army.mil.be
<mailto:Demets.Steven@army.mil.be>
-----Original Message-----
From: Gord Michaels [mailto:gord_michaels@HOTMAIL.COM]
Sent: dinsdag 18 januari 2000 22:00
To: NV-L@UCSBVM.ucsb.edu
Subject: HELP with cisco symbols...
Hello All.
My env: Netview 5.1.1, AIX 4.2.1.
I am having a real problem transferring over the cisco
bitmaps for my Cisco
7500 routers. I have another Netview box with Ciscoworks
installed. Thus,
that box automatically has the symbols installed.
Here is what I have done to date:
1. I copied over all the 7500.*.m and 7500.*.p files into
the
/usr/OV/bitmaps/C directory.
2. I examined the file: /usr/OV/conf/C/oid_to_sym.
The OID that is asscoiated with my Cisco 7500 sereis routers
is:
1.3.6.1.4.1.9.1.8
Here is the present line in the oid_to_sym file:
1.3.6.1.4.1.9.1.8:Connector:Gateway # Cisco 7000
So, as just noted, I have copied over the files and made
them all r--r--r--
1 bin bin
Does anyone know what I do next, or how I am suppose to edit
the oid_to_sym
file ??? I have tried several things but NO LUCK whatsoever.
I also did a ovw -config, ovw -verify, ovw -fields.
After each attempt I highlighted the device and did a Demand
Poll, no change
in symbol.
If anyone has ever done this before, your help would be
greatly appreciated.
Sincerely,
Gord Michaels.
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
|