Robert;
You must completely uninstall NetView server before you attempt to install it
again. You can do that from
1. the NetView Server icon in the policy region you chose during the
installation, under the Maintain submenu
2. or from SMIT under Communication Applications and Services
After you do that, run the clenup script located on the NetView CD in the
MUSTSEE dir. to ensure nothing is left from the failed install.
NetView always installs into /usr/OV. Create a filesystem and mount it on this
directory. If you do not want this, I do not think a symbolic link
/usr/OV pointing to another location will not work. I have never seen any
dependence on the Framework installation directory.
There is probably no problem with your CD. This is a usual message about the
PKT files installed at the time an error occurs.
Please, follow the release notes for NV 5.1 and for the maintenance releases
you are installing.
HTH,
svasti te 'stu,
Vladimir.
M Robert Prakash wrote:
> Hi
>
> Thanks Vladimir,please ignore my earlier mail,I was able to locate the
> SUNWsacom
> file and install it.When I installed Netview this is the error I got(see
> below).To give you some history.I installed Framework in the /export/home
> directory since it is free.My /usr directory was almost full when I did
> Netview
> install.I thought since Framework was installed in /export/home,netview will
> also get installed there.But I think it got installed in the /usr directory.Is
> there any chance I can change the path before installing it.Now when I do
> wlsinst -a ,it lists Netview 5.1 server as a Product.An icon was also created
> in the Netview Policy region after the installation.But the product is not
> installed properly.Is there a uninstall available so that I can reinstall it
> elsewhere.Also I found that the usr directory inside
> /export/home/Tivoli/bin/solaris2 was actually a link to /usr.So instead of
> actually getting installed inside /export/home,it got installed in /usr where
> there was no space.Also could there be a problem with my Cdrom,it says there
> is
> some problem in the file8.PKT and file12.PKT.
>
> Thanks in advance
>
> Robert
>
> __________________________________________________
> Checking product dependencies...
> patch NVTMP311 is already installed as needed.
> Dependency check completed.
> Inspecting node sunsnr...
> Installing product: TME 10 NetView Server 5.1
>
> Unless you cancel, the following operations will be executed:
> For the machines in the independent class:
> hosts(sunsnr)
> sunsnr already has the Message Catalogs installed (from sunsnr).
>
> For the machines in the solaris2 class:
> hosts(sunsnr)
> need to copy the architecture specific Binaries to:
> sunsnr:/export/home/Tivoli/bin/solaris2
> sunsnr already has the Server Database installed (from sunsnr).
> need to copy the architecture specific NetView Base Configuration to:
> sunsnr:/export/home/Tivoli/bin/solaris2
> need to copy the architecture specific NetView Features to:
> sunsnr:/export/home/Tivoli/bin/solaris2
> need to copy the architecture specific NetView Features Configuration to:
> sunsnr:/export/home/Tivoli/bin/solaris2
>
> ---
> To continue with installation, select the ``Continue Install'' button
> -OR-
> to abort this installation attempt, select the ``Cancel'' button.
>
> Executing queued operation(s)
> Distributing architecture specific Binaries for sunsnr
> .......................
> Something went wrong:
> Media Packet: "/cdrom/volume_name/FILE8.PKT"
> sunsnr:FAILED (fatal error)
> Product install completed successfully.
> /export/home/Tivoli/bin/solaris2/usr/OV/lib/libovcmapi.so: short write;
> filesystem full?
> bad file write.
> FATAL.
> completed with errors.
>
> Distributing architecture specific NetView Base Configuration for sunsnr
>
> Something went wrong:
> Media Packet: "/cdrom/volume_name/FILE12.PKT"
> sunsnr:FAILED (soft error)
>
> Failure: the last few lines of the error log
> (/tmp/NVS_51_CONFBASE_after.error):
> PATH=/export/home/Tivoli/bin/solaris2/bin:/bin:/usr/bin:/export/home/Tivoli/bin/solaris2/tmenv6000/image/OV/usr/OV/bin:/usr/OV/bin:/usr/ccs/bin
>
> + export PATH
> PREREQ_OUT=nv6000.base.obj.prereq.out
> LPP_LOC=/usr/lpp/nv6000/liblpp.En_US.a
> + [ ! -d /usr/lpp/nv6000/TME_tmp ]
> + cd /usr/lpp/nv6000/TME_tmp
> + [ ! -f /usr/lpp/nv6000/liblpp.En_US.a ]
> + echo Unable to locate /usr/lpp/nv6000/liblpp.En_US.a
> Unable to locate /usr/lpp/nv6000/liblpp.En_US.a
> + exit 1
> completed with errors.
>
> Distributing architecture specific NetView Features for sunsnr
> ................
> Something went wrong:
> Media Packet: "/cdrom/volume_name/FILE13.PKT"
> sunsnr:FAILED (fatal error)
> /export/home/Tivoli/bin/solaris2/usr/OV/bin/C5Maint: short write; filesystem
> full?
> bad file write.
> FATAL.
> completed with errors.
>
> Distributing architecture specific NetView Features Configuration for sunsnr
>
> Something went wrong:
> Media Packet: "/cdrom/volume_name/FILE14.PKT"
> sunsnr:FAILED (soft error)
>
> Failure: the last few lines of the error log
> (/tmp/NVS_51_NVFCONF_after.error):
> PATH=/export/home/Tivoli/bin/solaris2/bin:/bin:/usr/bin:/export/home/Tivoli/bin/solaris2/tmenv6000/image/OV/usr/OV/bin:/usr/OV/bin:/usr/ccs/bin
>
> + export PATH
> PREREQ_OUT=nv6000.features.obj.prereq.out
> LPP_LOC=/usr/lpp/nv6000/liblpp.En_US.a
> + [ ! -d /usr/lpp/nv6000/TME_tmp ]
> + cd /usr/lpp/nv6000/TME_tmp
> + [ ! -f /usr/lpp/nv6000/liblpp.En_US.a ]
> + echo Unable to locate /usr/lpp/nv6000/liblpp.En_US.a
> Unable to locate /usr/lpp/nv6000/liblpp.En_US.a
> + exit 1
> completed with errors.
>
> Registering product installation attributes...registered.
>
> Finished product installation.
--
----------- #include <std_disclaimer> -----------
Vladimir PETR
DATASYS s.r.o.
Sinkulova 23
CZ-14700 Praha 4
TEL +420-2-6138-8211
FAX +420-2-6138-8210
mailto:Petr@datasys.cz
|