I just requested a PMR number for our problem with
accessing mgrAgent variables with a read-only community
string. The number is 05842,998.
I mentioned your question about the -f flag to a
developer who is working on this and she said
that the -f flag specifies whether mgragentd
will run in daemon mode. So, the -f flag most likely
isn't the source of the problem. She also mentioned that
the most recent patch for SEA is 107709-06. I only had
107709-03 installed and upgrading didn't solve the
mgragentd access problem, but it's worth mentioning
that there are a number of other SEA problems that
107709-06 corrects.
-Elizabeth
Tivoli Education
In a message dated Tue, 2 May 2000 3:51:08 AM Eastern Daylight Time, "Rauwers,
Laurens" <rauwers@hitt.nl> writes:
<< Elizabeth,
The MIB can be read now. Thanks for the tip.
It is an installation problem.
Do you have a problem id. or something like that, so that I can look on the
web site for a patch/solution?
Laurens Rauwers
HITT
e-mail: rauwers@hitt.nl
> -----Original Message-----
> From: Ebagley2@aol.com [SMTP:Ebagley2@aol.com]
> Sent: Monday, May 01, 2000 3:24 PM
> To: nv-l@tkg.com
> Subject: Re: [NV-L] mgragent mib where is it?
>
> This sounds a lot like the situation I encountered when configuring the
> Solaris 7 client to connect to the Solaris 7 NetView server. I had to
> access with a read/write community string for the client to successfully
> read the mgrAgentd variables. For testing, I modified the
> /etc/snmp/conf/mgragentd.acl to allow read/write access for public, but
> now wonder if that -f flag you mention has something to do with the
> problem.
>
> We've reported this to development, as well, so we should know something
> more soon.
>
> http://www.tkg.com/search?NS-search-page=document&NS-rel-doc-name=/nv-l/ar
> chive/html/msg11968.html&NS-query=mgragentd.acl&NS-search-type=NS-boolean-
> query&NS-collection=NV-L_LIST&NS-docs-found=1&NS-doc-number=1
>
> -Elizabeth
> Tivoli Education
>
>
> In a message dated Mon, 1 May 2000 11:47:21 AM Eastern Daylight Time,
> "Rauwers, Laurens" <rauwers@hitt.nl> writes:
>
> << Hello,
>
> Running NV5.1.2 on SUN solaris 2.7
>
> The MIB address 1.3.6.1.4.1.2.6.4.6 cannot be read on our 2 NetView
> Servers.
> This is the MIB from the mgragent daemon.
> This daemon runs with param. -f.
> I cannot find a man page of this daemon.
> So can someone tell me why this MIB cannot be read?
>
> It is working fine on a DEC UNIX system.
>
> Thanks in advance.
>
> Laurens Rauwers
> HITT
> e-mail: rauwers@hitt.nl
> _________________________________________________________________________
>
> NV-L List information (unsubscribing, policies, posting, digest version,
> searchable archives): http://www.tkg.com/nv-l
> >>
>
>
> _________________________________________________________________________
>
> NV-L List information (unsubscribing, policies, posting, digest version,
> searchable archives): http://www.tkg.com/nv-l
_________________________________________________________________________
NV-L List information (unsubscribing, policies, posting, digest version,
searchable archives): http://www.tkg.com/nv-l
>>
|