Scott, you may go into the backup /usr/OV/security/conf
and edit sec.conf. and turn security OFF. This may allow
migration to proceed.
>>>>>>
The happiest of people don't necessarily have the best of everything; they just
make the
most of everything that comes along their way.
<<<<<
Bill Jameson
Tivoli Systems
(919)-486-0292
"Scott Hammons" <shammons@MCBRIDE.COM> on 07/26/2000 06:44:33 PM
Please respond to IBM NetView Discussion <nv-l@tkg.com>
To: "'Netview Users'" <nv-l@tkg.com>
cc: (bcc: Bill Jameson/Tivoli Systems)
Subject: [NV-L] Upgrade to V 6.0 from V 5r1
Hello Listers,
I have a simple (maybe) question that you guys can help me out with. I followed
the pre-checks prior to attempting to upgrade to Version 6.0. I made a backup
of my current environment, checked to make sure everything was working, turned
off security, shutdown all GUI's, shutdown all daemons, and ran the chcktrapd
script (no errors).
I then began to proceed with the upgrade, by installing the Netview Framework
patch and then installing the Netview Server 6.0 update. I received the
following error in the /tmp/NVS_60_BIN_before.output:
"ERROR: Security level is not off in your backup directory. Please remove the
backup directory, turn security off by using
Security Administration dialog box, then do upgrade install again."
I know that the problem was caused by me not shutting off security prior to the
backup. However, is there a work around for this or must I start all over? Any
help would be appreciated.
Scott Hammons
Consultant
McBride and Associates, Inc.
Direct: (210) 489-7433
Fax: (210) 489-7401
Pager: (888) 618-5768
shammons@mcbride.com
|
Hello Listers,
I have a simple (maybe) question that you guys can help me out
with. I followed the pre-checks prior to attempting to upgrade to Version
6.0. I made a backup of my current environment, checked to make sure
everything was working, turned off security, shutdown all GUI's, shutdown all
daemons, and ran the chcktrapd script (no errors).
I then began to proceed with the upgrade, by installing the
Netview Framework patch and then installing the Netview Server 6.0 update.
I received the following error in the
/tmp/NVS_60_BIN_before.output:
"ERROR: Security level is not off in your backup
directory. Please remove the backup directory, turn security off by
using
Security Administration dialog box, then do upgrade install
again."
I know that the problem was caused by me not shutting off
security prior to the backup. However, is there a work around for this or
must I start all over? Any help would be appreciated.
Scott Hammons
Consultant
McBride and Associates,
Inc.
Direct: (210) 489-7433
Fax: (210)
489-7401
Pager: (888) 618-5768
shammons@mcbride.com
|
|