Try stopping and restarting the snmpd daemon -
stopsrc -s snmpd
startsrc -s snmpd
and try an ovstart for netmon and see if that helps.
If not, edit /etc/snmpd.conf and make certain that public is a read community
name.
By the way, just plain 5.1 is out of support. You should be on 5.1.3
James Shanks
Team Leader, Level 3 Support
Tivoli NetView for UNIX and NT
it056625@IT.IBM.COM on 09/08/2000 10:30:44 AM
Please respond to IBM NetView Discussion <nv-l@tkg.com>
To: nv-l@tkg.com
cc: (bcc: James Shanks/Tivoli Systems)
Subject: [NV-L] Netmon deamon problems
Hi, this is my problem:
I have Netview 5.1on AIX 4.3.2
and netmon doesn't start. In the netmon.trace file this is the message:
Cannot communicate with SNMP Agent via loopback address (127.0.0.1); it is
either not running or has been configured with a community name different
from that configured into TME 10 NetView for this system. If a community
name ha
s been configured into the SNMP Agent, that community name must be
configured
via xnmsnmpconf and /usr/OV/conf/ovsnmp.conf for address 127.0.0.1 as well
as for the hostname or IP address of this system.
Or, the /usr/OV/conf/snmpmib and /usr/OV/conf/snmpmib.bin files are
corrupted
and need to be rebuilt using the
Maintain->Rebuild MIB binary file with installation MIB defaults
option in smit
How can I do to solve this problem?
Thank you for help!!
Cordiali saluti / Best regards.
Lorenza Silvani
IBM South Region, NWSM Division
e-mail: Lorenza_Silvani@it.ibm.com
phone: +39 039 6004662 internal: 84662
fax: +39 039 6009021
_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l
|