Thanks for replying...
I ma receiving some traps from cisco that netview can format but some
are in an "Unknown" state. I want to format the unknowns by loading
some type of trap file , if that possible. And also I wish to create
rules with the ruleset editor. Currently if I start the ruleset editor
and Add the "Trap Settings" box and choose "Netview6000" I get a whole
slew of stuff to filter on. If I choose "cisco" from the same window
I get NOTTA,NOTHING,ZILCH!!! I'm thinking that if I get some traps to
show-up in the "Event Configuration Dialog" box I will be able to create
ruleset filters.
I think I can use the nvaddtrapdconf program but I dont know what file
it needs to read...
Also I am using Solaris version 6.0.0 Netview.
Clarence Hart
UPS
Office: 410-560-4182
Fax: 410-560-4329
chart@ups.com
> From: James_Shanks@tivoli.com
> Importance: Normal
> Subject: Re: [NV-L] Adding cisco traps?
> To: IBM NetView Discussion <nv-l@tkg.com>
> Date: Thu, 28 Sep 2000 11:50:43 -0400
> X-MIMETrack: Serialize by Router on SCHub/Tivoli Systems(Release 5.0.4a |July
24, 2000) at 09/28/2000 10:49:16 AM
> MIME-Version: 1.0
> X-Sorted: Bulk
>
> Clarence -
>
> Let's back up here. Are you already getting Cisco-specifc traps that you
> want to format or select for further processing or not ? If you have
> 6.0.1 for UNIX then you have a trapd.conf you can merge with nvaddtrapdconf
> to add a bunch of Cisco trap formats, but otherwise you will have to do it
> the old fashioned way with mib2trap and the script from the Cisco website,
> and by hand. But that has nothing to do with rulesets nor with getting
> Cisco traps in the event window. The standard ruleset forwardall.rs will
> show all traps even Cisco's if they are there to be shown. The only thing
> trapd.conf does is format them they way you want. So can you clarify here
> what problem you are tying to solve?
>
> James Shanks
> Team Leader, Level 3 Support
> Tivoli NetView for UNIX and NT
>
>
>
> Clarence Hart <rti1clh@ismd.ups.com> on 09/28/2000 11:04:56 AM
>
> Please respond to IBM NetView Discussion <nv-l@tkg.com>
>
> To: nv-l@tkg.com
> cc: clh@ismd.ups.com (bcc: James Shanks/Tivoli Systems)
> Subject: [NV-L] Adding cisco traps?
>
>
>
>
> Hello all,
>
> Once agian thanks for your previous help one all of my Q's..
>
> I am trying to create a few rules with the ruleset editer to pick
> specific traps for cisco "its empty"!!! I also check the "Event
> Configuration
> Dialog" window and clicked cisco and nothing appears. From reading some of
> the postings out here i gather most of you received these traps from
> installing CiscoWorks ???
> Is there some where I can download some cisco specif traps and install
> them with the nvaddtrapdconf command?
>
>
> Thanks
>
>
> Clarence Hart
> UPS
> Office: 410-560-4182
> Fax: 410-560-4329
> chart@ups.com
>
> _________________________________________________________________________
> NV-L List information and Archives: http://www.tkg.com/nv-l
>
>
> _________________________________________________________________________
|