MLM/Netview trap receive ports on NT

["Lee MacDonald" <leem@fast.no>]

This is a multi-part message in MIME format.

Hi Guys,

I haven't received a reply to my previous mail.  If there's any Netview for
NT guru's out there that could help me I'd be grateful.  I'm banging my head
against a brick wall at the moment :-)

Another question:     The documentation keeps mentioning the unix tool
smconfig to configure the MLM for NT, which I don't have as I'm running the
Netview server on NT.  How can I manually configure the MLM for NT?

Thanks again.

----Original Message-----
From: owner-nv-l@tkg.com [mailto:owner-nv-l@tkg.com]On Behalf Of Lee
MacDonald
Sent: 12 March 2001 16:01
To: nv-l@tkg.com
Subject: [NV-L] MLM/Netview trap receive ports on NT


Hi Guys,

I wondering if you can help me.

I'm new to Netview.  Were using 5.12 on Windows NT.  I have setup Netview as
a server in one of our Data Centres(DC) and installed MLM for NT(so
Netview's acting as an attended MLM, right?)  I have also installed Netview
as a server in our Office.  I wish to use Netview in the office to gather
all information from the MLM in the DC.  I know roughly how to do this, but
I've come across the problem that both the MLM and Netview server in the DC
are receiving traps on port 162.  I need to change this so the netview
receives traps on another port, so it doesn't conflict with the MLM.  I've
read the documentation, but I'm still not sure how to do this?

Any help would be appreciated.

Thanks.

Hi Guys,

 

I haven't received a reply to my previous mail.  If there's any Netview for NT guru's out there that could help me I'd be grateful.  I'm banging my head against a brick wall at the moment :-)

 

Another question:     The documentation keeps mentioning the unix tool smconfig to configure the MLM for NT, which I don't have as I'm running the Netview server on NT.  How can I manually configure the MLM for NT?

 

Thanks again.

 

----Original Message-----
From: owner-nv-l@tkg.com [mailto:owner-nv-l@tkg.com]On Behalf Of Lee MacDonald
Sent: 12 March 2001 16:01
To: nv-l@tkg.com
Subject: [NV-L] MLM/Netview trap receive ports on NT

Hi Guys,

 

I wondering if you can help me.

 

I'm new to Netview.  Were using 5.12 on Windows NT.  I have setup Netview as a server in one of our Data Centres(DC) and installed MLM for NT(so Netview's acting as an attended MLM, right?)  I have also installed Netview as a server in our Office.  I wish to use Netview in the office to gather all information from the MLM in the DC.  I know roughly how to do this, but I've come across the problem that both the MLM and Netview server in the DC are receiving traps on port 162.  I need to change this so the netview receives traps on another port, so it doesn't conflict with the MLM.  I've read the documentation, but I'm still not sure how to do this?

 

Any help would be appreciated.

 

Thanks.