Hi Bob,
I can think of two ways checking the T/EC slot mappings
a) Check the trap that corresponds to the closed event in your netview
workspace, select it and go for Options / Event Description and
Modify the T/EC Slot Mapping in the Event Desciption
(remove "status = CLOSED" or set "status = OPEN"
b) Have a look at /usr/OV/conf/c/trapd.conf for all traps
that have a "status CLOSED" slot value defined
Cheers,
Helmut Schroeder
"Gallagher, Bob" <bob.gallagher@firstcitizens.com>@tkg.com on 27.04.2001
13:58:12
Bitte antworten an IBM NetView Discussion <nv-l@tkg.com>
Gesendet von: owner-nv-l@tkg.com
An: "'nv-l@tkg.com'" <nv-l@tkg.com>
Kopie:
Thema: [NV-L] T/EC mapping
I need to get the details of where I go to change the Status field from
CLOSED to OPEN as NV is sending events to
T/EC. I have the basic idea but it is not intuitive enough so that how this
is changed or if I was successful. Please help
NetView 6.0.1
RS6000 H80
AIX 4.3.3
thx,
Robert Gallagher, VP
Systems Engineer Consultant
First Citizens Bank & Trust Co.
100 East Tryon Rd. DAC22
Raleigh, NC 27603
Ph. 919-716-8206
Pager.919-565-7622
------------------------------------------------------------------------------
This electronic mail and any files transmitted with it are confidential and are
intended solely for the use of individual or entity to whom they are addressed.
If you are not the intended recipient or the person responsible for delivering
the electronic mail to the intended recipient, be advised that you have received
this electronic mail in error and that any use, dissemination, forwarding,
printing, or copying of this electronic mail is strictly prohibited. If you have
received this electronic mail in error, please immediately notify the sender by
return mail.
==============================================================================
_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l
|