In the Event Configuration dialog in Netview, for the event you are
interested in,
see the button for T/EC Slot Mapping. Go in there. One of the slots being
set
(OVstatus or something) is be set to CLOSED. Either delete that mapping, so
it
uses the default (OPEN), or change the setting to OPEN. Piece of cake.
Cordially,
Leslie A. Clark
IBM Global Services - Systems Mgmt & Networking
Detroit
"Gallagher, Bob" <bob.gallagher@firstcitizens.com>@tkg.com on 04/27/2001
07:58:12 AM
Please respond to IBM NetView Discussion <nv-l@tkg.com>
Sent by: owner-nv-l@tkg.com
To: "'nv-l@tkg.com'" <nv-l@tkg.com>
cc:
Subject: [NV-L] T/EC mapping
I need to get the details of where I go to change the Status field from
CLOSED to OPEN as NV is sending events to
T/EC. I have the basic idea but it is not intuitive enough so that how this
is changed or if I was successful. Please help
NetView 6.0.1
RS6000 H80
AIX 4.3.3
thx,
Robert Gallagher, VP
Systems Engineer Consultant
First Citizens Bank & Trust Co.
100 East Tryon Rd. DAC22
Raleigh, NC 27603
Ph. 919-716-8206
Pager.919-565-7622
------------------------------------------------------------------------------
This electronic mail and any files transmitted with it are confidential and
are intended solely for the use of individual or entity to whom they are
addressed. If you are not the intended recipient or the person responsible
for delivering the electronic mail to the intended recipient, be advised
that you have received this electronic mail in error and that any use,
dissemination, forwarding, printing, or copying of this electronic mail is
strictly prohibited. If you have received this electronic mail in error,
please immediately notify the sender by return mail.
==============================================================================
_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l
|