Qian:
The location name (China_SH_1) must always match the location symbol
(room). You have two lines with matching Location names (China_SH_1) and
location symbol (room), but your last line has a mismatch (China_SH_2) and
symbol name (room). Change room in the last line to another symbol name
not being used and see what happens.
Mike Pearson
Please respond to IBM NetView Discussion <nv-l@tkg.com>
Sent by: owner-nv-l@tkg.com
To: nv-l@tkg.com
cc:
Subject: [NV-L] network does not going to sub location correctly
Hi all.
I have problem with netview location.conf file. I am using netview
6.0.2.
Part of My location.conf is as below:
China 0 Site
China_SH_1 10.33.2.* Room China
China_SH_1 172.17.4-7.* Room China
China_SH_2 10.33.6.* Room China
" China" is one of the locations. "China_SH_1" is the sub_location inside
the "China". "China_SH_2" is another sub_location inside the "China".
The networks for China_SH_1 goes into the right sub_location with name
"China_SH_1", but the network 10.33.6.0 Does not going to the right
sub_location " China_SH_2, this network 10.33.6.0 appears on the main map
out of the China location.
Any hints will be greatly appreciated.
Thanks in advance
Qian Jing
Tivoli/ISM, IBM Global Service
10/F Shui On Plaza, 333 Huai Hai Zhong Road,
Shanghai 200021, P.R.China
Tel: (86)21-63262288x4717
E-Mail: qianj@cn.ibm.com
_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l
|