Thank you for your responce. I use the cpe and i defined some different users,
with
different profiles but can you tell me about the definition of different VIEWS
for
a group of users?? Now i have only one view and it is the same for all my users.
Any user of my definitions, work on a different competence, so they need a
particular view on the basis of their job. Help me, please, to create different
view. Thanks'.
Paul Sandler wrote:
> Luigino,
>
> To create and modigy user profiles, you use the cpe (command profile
> editor) on the NMC Server. Type in cpe
> Enter your NetView id and password and you will see the command profile
> editor.
>
> You can create many profiles and Operators. Once you save and close, the
> profiles are active immediately.
>
> Paul
>
> At 05:11 PM 6/12/2001 +0200, you wrote:
> >Hi ,
> >
> >I work with TME10 Netview for OS/390 version 1.3 and NMC console, and i
> >have a problem.
> >I would like to define some NMC operator with different profile and
> >different views, it's possible?
> >
> >hope this helps!
> >
> >regards,
> >Luigino Perazzolo
> >
> >
> >
> >
> >luigino.perazzolo@telecomitalia.it
> >
> >
> >
> >
> >_________________________________________________________________________
> >NV-L List information and Archives: http://www.tkg.com/nv-l
> >
>
> _________________________________________________________________________
> NV-L List information and Archives: http://www.tkg.com/nv-l
Thank you for your responce. I use the cpe and i defined some different
users, with different profiles but can you tell me about the definition
of different VIEWS for a group of users?? Now i have only one view
and it is the same for all my users. Any user of my definitions,
work on a different competence, so they need a particular view on the basis
of their job. Help me, please, to create different view. Thanks'.
Paul Sandler wrote:
Luigino,
To create and modigy user profiles, you use the cpe
(command profile
editor) on the NMC Server. Type in cpe
Enter your NetView id and password and you will see the command profile
editor.
You can create many profiles and Operators. Once you save and
close, the
profiles are active immediately.
Paul
At 05:11 PM 6/12/2001 +0200, you wrote:
>Hi ,
>
>I work with TME10 Netview for OS/390 version 1.3 and NMC console,
and i
>have a problem.
>I would like to define some NMC operator with different
profile and
>different views, it's possible?
>
>hope this helps!
>
>regards,
>Luigino Perazzolo
>
>
>
>
>luigino.perazzolo@telecomitalia.it
>
>
>
>
>_________________________________________________________________________
>NV-L List information and Archives: http://www.tkg.com/nv-l
>
_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l
|