Well, now I analyze Netmon daemon and I think that i found the problem, I have
active two polling, status and changes polling, if disabled status polling then
the netmon not died, what can i do, for repair this error? I have viewed
netmon.trace and all it is well.
thanks to all.
-----Mensaje original-----
De: owner-nv-l@tkg.com [mailto:owner-nv-l@tkg.com]En nombre de Leslie
Clark
Enviado el: jueves, 12 de julio de 2001 15:51
Para: IBM NetView Discussion
Asunto: RE: [NV-L] Netmon died
A clarification on Kevin's observation:
Unreachable things in the seedfile are not a problem. But
unresolvable names in the seedfile ARE. If you do
ovstatus netmon
it will tell you if that is the problem and direct you to
/usr/OV/log/netmon.trace. That file will list all of the unresolvable
names so you can fix them. If netmon was down, it will fail to start.
If it was up and you did a 'netmon -y', it will refuse to reload the
seedfile.
Cordially,
Leslie A. Clark
IBM Global Services - Systems Mgmt & Networking
Detroit
Kevin Gow <kevin.gow@csfs.com>@tkg.com on 07/12/2001 07:08:42 AM
Please respond to IBM NetView Discussion <nv-l@tkg.com>
Sent by: owner-nv-l@tkg.com
To: nv-l <nv-l@tkg.com>
cc: parduengo <parduengo@telecable.es>
Subject: RE: [NV-L] Netmon died
Something similar was happening to me. This is what I did...
Check your seedfile. Use the fping command and route the output to a file,
e.g.: fping -f objects.seed > objects.seed.output
You will get a list of objects wich are reachable and wich are not.
Comment out the unreachable objects in your seedfile.
I don't know if this will help in your case... perhaps it is worth a try.
Regards,
Kevin Gow.
-----Original Message-----
From: parduengo@telecable.es [mailto:parduengo@telecable.es]
Sent: Thursday, July 12, 2001 11:44 AM
To: nv-l@tkg.com
Subject: [NV-L] Netmon died
I have netview 6.0.1 on Solaris. If I start netmon about 2 minutes it is
died.
I active de netmon trace and once of trace show netmon died by PMD, but in
my
Control desk in events show "netmon probably died: ungracefully
disconnected
from trapd".
I running ovmapcount, ovtopofix, ... ovstop, ovstart, reset_ci, all
commands I
know for repair one problem, I view the file system, memory, and processor
and
it is good state.
What can i do?
Thanks to all.
---------------------------------------------
Este mensaje fue enviado
utilizando el servicio de correo-web de:
http://www.telecable.es
_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l
_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l
_________________________________________________________________________
NV-L List information and Archives:
http://www.tkg.com/nv-l
---------------------------------------------
Este mensaje fue enviado
utilizando el servicio de correo-web de:
http://www.telecable.es
|