Hi,
What OS are you running and what version of NetView?
At 12:14 PM 26-07-01 +0530, you wrote:
>HI All,
>I have got no reply on my previous query posted on 24th july, Request you
>all to please help me on this. Please let me know If some further info is
>required on this. This data collection is used for making FR Circuit UP
>time report. Is there any other way to know Fr Circuit UP time?
>
>Query which was raised is attached below for the reference.
>
>Look forward to hear this time. Thanking you all in advance.
>
>With Best Regards
>
>Ajay Sachdeva
>IBM Global Services India Pvt. Ltd.,
>E- Mail : asachdev@in.ibm.com
>
>
>
>Ajay Sachdeva
>07/24/2001 08:35 PM
>
>To: IBM NetView Discussion <nv-l@tkg.com>
>cc:
>From: Ajay Sachdeva/India/IBM@IBMIN
>Subject: [NV-L] frame relay frCircuitstate data collection (Document
> link: Ajay Sachdeva)
>
>Hi all,
>we are collecting the data for frCircuitstate MIB variable which gives
>Virtual circuits status as active or inactive. We have four virtual
>circuits which are configured as four sub- interfaces on the router . Now
>when we use MIB browser to see frCircuitstate values it shows
>Instance Value
>4.77 active
>4.90 active
>4.100 active
>4.600 active
>
>which is perfectly OK
>
>But when we try to see the collected data using collect data option we see
>only 4 as instance number for all four circuits. Ideally it should show
>instance number as 4.77, 4.90,4.100 and 4.600 so that we can identify that
>for which circuit this value corresponds to.
>
>Seek for your kind help on this. Thanking you all in advance.
>
>With Best Regards
>
>Ajay Sachdeva
>IBM Global Services India Pvt. Ltd.,
>E- Mail : asachdev@in.ibm.com
>
>
>
>
>_________________________________________________________________________
>NV-L List information and Archives: http://www.tkg.com/nv-l
>
Joe Fernandez
Kardinia Software
jfernand@kardinia.com
|