nv-l
[Top] [All Lists]

RE: setting traps

To: nv-l@lists.tivoli.com
Subject: RE: setting traps
From: Edwin Kiran F <EKiran@bangalorelabs.com>
Date: Tue, 7 Aug 2001 10:40:23 +0530
thanks Leslie..
i will try this and let u know the result.ok

regards
Edwin

-----Original Message-----
From: Leslie Clark [mailto:lclark@us.ibm.com]
Sent: Monday, August 06, 2001 3:43 PM
To: IBM NetView Discussion
Subject: RE: [NV-L] setting traps


For loading the traps, there is a trapd.conf delivered with 6.01 that has
just about everything in it. On Unix, you can do
   nvaddtrapdconf /usr/OV/newconfig/OVSNMP-RUN/trapd.conf
There is one small problem in those definitions that I know of.
One or more Cisco enterprises send a specific 1 trap with an
enterprise that is a digit shorter than expected, so the events
display shows those as the generic Cisco enterprise (1.3.6.1.4.1.9)
specific 1, which is tcpConnectClose. The cisco rsrb enterprise
is one that does this. You will need to add another enterprise like
the rsrb enterprise but with the actual enterprise number of the
trap. You can tell from the variable bindings that accompany the
trap that it is not a tcpConnectClose trap.

This method  (nvaddtrapdconf) is much, much more convenient
than using mib2trap to pull all of the trap defintions out of all of
the mibs, which is the method to be used with other vendors'
mibs that contain trap definitions.

Cordially,

Leslie A. Clark
IBM Global Services - Systems Mgmt & Networking
Detroit



 

                    "Paul Maine

                    Jr."                 To:     "'IBM NetView Discussion'"

                    <paulm@msicc.c        <nv-l@tkg.com>

                    om>                  cc:

                    Sent by:             Subject:     RE: [NV-L] setting
traps           
                    owner-nv-l@tkg

                    .com

 

 

                    08/06/01 08:47

                    AM

                    Please respond

                    to IBM NetView

                    Discussion

 

 




Please see the following link for the Cisco MIBs. You can only collect
using
SNMPv1 MIBs.
http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml


-----Original Message-----
From: Edwin Kiran F [mailto:EKiran@bangalorelabs.com]
Sent: Monday, August 06, 2001 7:25 AM
To: 'nv-l@tkg.com'
Subject: [NV-L] setting traps


Hi list,
iam new to Netview,can anyone of u guide me on
 1.How to get mibs for cisco routers,(which site) and how do i load it.
2.After loading the MIBs how can i configure the Traps.
Thanks in advance
           F.Edwin kiran
           EMS/NMS
           Bangalore Labs, India
           http://www.bangalorelabs.com/
           "Internet Infrastructure Managers"


_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l
_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l


<Prev in Thread] Current Thread [Next in Thread>

Archive operated by Skills 1st Ltd

See also: The NetView Web