Pierre, you may need to clarify your question a little bit. What else is
in your seedfile, if anything?
As a guideline, it is best to include rules in your seedfile that allow the
(re-)discovery of whatever you have already discovered and would
want to rediscover if you had to delete it for any reason.
If you are going to add an address for a new router, it is not necessary
to use the OID record. You only need one address entry for a router.
But perhaps you want the new routers to show up automatically? The
OID record would allow that, but not prevent any other discovery.
If you do use an OID record, you will find that small 'stub' objects are
added to the database to represent all of the nodes it finds which do
NOT meet that criteria. Netview will then check those stubs daily to
see if they have turned into something with that OID. This can cause
a huge object count, and periodic degradation of performance.
The thing to do, if you add positve OID records, is to restrict the
overall discovery as much as possible with negative address ranges.
For instance, exclude your DHCP ranges.
If this does not answer your question, please ask again.
Cordially,
Leslie A. Clark
IBM Global Services - Systems Mgmt & Networking
Detroit
junior@ssss.go
uv.qc.ca To: nv-l@tkg.com
Sent by: cc:
owner-nv-l@tkg Subject: [NV-L] Seed.File
.com
08/24/01 02:15
PM
Please respond
to IBM NetView
Discussion
Hi!
I Have a question about the creation of the seed.file. I have discover all
my
nodes and I aonly want to discover (new nodes) the new routers. It is
possbile
to include the OID .1.3.6.1.4.1.9 with the Ip Adresse ine the seed file?
Thank's
Pierre Racine
Quebec City
_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l
|