Sabi,
I thought I had done this several times for the NetView Advanced class
but obviously not in quite the same way as yourself. What error message
do you get when you try to start the desktop? Presumably you have got
the Tivoli environment sourced?
When you say the command line doesn't work, do you mean running wpatch
with the appropriate IND parameter doesn't work? Is the oserv running?
(I assume your TMR server is also the system you are installing NetView
on?).
Cheers,
Jane
Sabirali Sama wrote:
> Hi all,
>
> I have installed Tivoli 3.7RevB on AIX 4.3.3 and then NetView 6.0 on
> the same TMR, for training purposes, I discovered that the Tivoli
> desktop fails to start if you exit the desktop. This is annoying if
> you are trying to upgrade to 6.01 and then to 6.02 as you need the
> Tivoli desktop to do the upgrade. The command line does not work
> either.
>
> Has anyone encountered this situation ?
>
> The obvious solution is NOT to exit the desktop until you have fully
> upgraded the NetView Server to 6.02. [Image]Sabirali SamaTivoli
> Certified Direct Line +44 7971 031637Fax: 0870
> 8314306 Training & Enterprise Management Consultancy Elyzium
> Limitedhttp://www.elyzium.co.uk *******************Internet Email
> Confidentiality Footer*******************
>
> The information transmitted in this message is intended only for the
> person or entity to which it is addressed and may contain confidential
> and/or privileged material. Any review, retransmission, dissemination
> or other use of, or taking of any action in reliance upon, this
> information by persons or entities other than the intended recipient
> is prohibited. If you receive this message in error, please contact
> the sender and delete the material from any computer.
>
>
>
>
--
Tivoli Certified Enterprise Consultant & Instructor
Skills 1st Limited, 2 Cedar Chase, Taplow, Bucks, SL6 0EU, UK
Tel: +44 (0)1628 782565
Copyright (c) 2001 Jane Curry <jane.curry@skills-1st.co.uk>. All rights
reserved.
Sabi,
I thought I had done this several times for the NetView Advanced class
but obviously not in quite the same way as yourself. What error message
do you get when you try to start the desktop? Presumably you have
got the Tivoli environment sourced?
When you say the command line doesn't work, do you mean running wpatch
with the appropriate IND parameter doesn't work? Is the oserv running?
(I assume your TMR server is also the system you are installing NetView
on?).
Cheers,
Jane
Sabirali Sama wrote:
Hi
all,
I have installed Tivoli 3.7RevB on AIX 4.3.3 and then NetView 6.0 on
the same TMR, for training purposes, I discovered that the Tivoli desktop
fails to start if you exit the desktop. This is annoying if you are trying
to upgrade to 6.01 and then to 6.02 as you need the Tivoli desktop to do
the upgrade. The command line does not work either.
Has anyone encountered this situation ?
The obvious solution is NOT to exit the
desktop until you have fully upgraded the NetView Server to 6.02.  Sabirali
SamaTivoli Certified Direct Line +44 7971 031637Fax:
0870 8314306 Training & Enterprise Management Consultancy Elyzium
Limitedhttp://www.elyzium.co.uk *******************Internet
Email Confidentiality Footer*******************
The information transmitted in this message is intended only for the
person or entity to which it is addressed and may contain confidential
and/or privileged material. Any review, retransmission, dissemination or
other use of, or taking of any action in reliance upon, this information
by persons or entities other than the intended recipient is prohibited.
If you receive this message in error, please contact the sender and delete
the material from any computer.
--
Tivoli Certified Enterprise Consultant & Instructor
Skills 1st Limited, 2 Cedar Chase, Taplow, Bucks, SL6 0EU, UK
Tel: +44 (0)1628 782565
Copyright (c) 2001 Jane Curry <jane.curry@skills-1st.co.uk>.
All rights reserved.
|
|