Re: how to add Cisco traps to NV

["CATALINA MARTINEZ" <CATALINA.MARTINEZ@tlc.state.tx.us>]

This is a MIME message. If you are reading this text, you may want to 
consider changing to a mail reader or gateway that understands how to 
properly handle MIME multipart messages.

Hi to all,

AIX 4.3.3 Netview 6.0.2

I ran the commands as stated on Page 9 of the 6.0.2 Release notes

cd /usr/OV/conf/C
cp tapd.conf trapd.conf.orig
nvaddtrapdconf /usr/OV/newconfig/OVSNMP-RUN/trapd.conf

I got the following error when running the third command:

grep: 0652-226 Maximum line length of 2048 exceeded
Merged /usr/OV/newconfig/OVSNMP-RUN/trapd.conf into /usr/OV/conf/C/trapd.conf

How do I increase the length? is there an easy way of finding out which mibs 
where added or omitted?

Do you know if the wireless(aironet) cisco mibs are included in the file? I 
need to add these mibs (wireless) but how do I do it if the length is exceeded?

Catalina

>>> kaveh_t@hotmail.com 09/03/01 11:36AM >>>
Hi Jane,

I did
nvaddtrapdconf  /usr/OV/newconfig/OVSNMP-RUN/trapd.conf

but although the NV6.0.2 Release Notes  say that
this should add
"forty-seven new enterprises and one hundred and nine new traps,
added for Cisco and Novell devices"
in Event Configuration  I could not find a single trap
under 1.3.6.1.4.1.9 which is Cisco!

That means I still don't have any Cisco traps configured.
Is there any other way to add Cisco traps
to NV, say, for Cat6509?

I tried mib2trap <mib> ... which ended up in syntax
errors in the mibs.




----Original Message Follows----
From: Jane Curry <jane.curry@skills-1st.co.uk>
Reply-To: IBM NetView Discussion <nv-l@tkg.com>
To: IBM NetView Discussion <nv-l@tkg.com>
Subject: Re: [NV-L] how to add Cisco traps to NV
Date: Fri, 31 Aug 2001 12:06:19 +0100
MIME-Version: 1.0
Received: from [198.3.130.68] by hotmail.com (3.2) with ESMTP id 
MHotMailBD58BD5800B140043894C6038244CDEE0; Fri, 31 Aug 2001 04:17:47 -0700
Received: from localhost (daemon@localhost)by westlake.tkg.com (8.9.3/8.9.3) 
with SMTP id GAA201272;Fri, 31 Aug 2001 06:10:05 -0500
Received: by westlake.tkg.com (bulk_mailer v1.12); Fri, 31 Aug 2001 06:08:46 
-0500
Received: (from mjrdomo@localhost)by westlake.tkg.com (8.9.3/8.9.3) id 
GAA166488for nv-l-outgoing; Fri, 31 Aug 2001 06:08:45 -0500
>From owner-nv-l@tkg.com Fri, 31 Aug 2001 04:18:02 -0700
Message-ID: <3B8F6FAB.41BB2516@skills-1st.co.uk>
X-Mailer: Mozilla 4.77 [en] (WinNT; U)
X-Accept-Language: en
References: <F2196mlB5RRTEuHeqpv0000231c@hotmail.com>
Sender: owner-nv-l@tkg.com
Precedence: bulk

The Release Notes for NetView 6.0.1 and 6.0.2 document how to import
LOTS of Cisco trap definitions.  Basically, they are all shipped in
/usr/OV/newconfig/OVSNMP_RUN/trapd.conf.  Back up your live trapd.conf
and then run the nvaddtrapdconf utility to merge your existing trap
customisation with the Cisco stuff.

Cheers, Jane

--
Tivoli Certified Enterprise Consultant & Instructor
Skills 1st Limited, 2 Cedar Chase, Taplow, Bucks, SL6 0EU, UK
Tel: +44 (0)1628 782565
Copyright (c) 2001 Jane Curry <jane.curry@skills-1st.co.uk>.  All rights
reserved.


_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l


_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp

_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l

Hi to all,

 

AIX 4.3.3 Netview 6.0.2

 

I ran the commands as stated on Page 9 of the 6.0.2 Release notes

 

cd /usr/OV/conf/C

cp tapd.conf trapd.conf.orig

nvaddtrapdconf /usr/OV/newconfig/OVSNMP-RUN/trapd.conf

 

I got the following error when running the third command:

 

grep: 0652-226 Maximum line length of 2048 exceeded

Merged /usr/OV/newconfig/OVSNMP-RUN/trapd.conf into /usr/OV/conf/C/trapd.conf

 

How do I increase the length? is there an easy way of finding out which mibs where added or omitted?

 

Do you know if the wireless(aironet) cisco mibs are included in the file? I need to add these mibs (wireless) but how do I do it if the length is exceeded?

 

Catalina

>>> kaveh_t@hotmail.com 09/03/01 11:36AM >>>
Hi Jane,

I did
nvaddtrapdconf  /usr/OV/newconfig/OVSNMP-RUN/trapd.conf

but although the NV6.0.2 Release Notes  say that
this should add
"forty-seven new enterprises and one hundred and nine new traps,
added for Cisco and Novell devices"
in Event Configuration  I could not find a single trap
under 1.3.6.1.4.1.9 which is Cisco!

That means I still don't have any Cisco traps configured.
Is there any other way to add Cisco traps
to NV, say, for Cat6509?

I tried mib2trap <mib> ... which ended up in syntax
errors in the mibs.




----Original Message Follows----
From: Jane Curry <jane.curry@skills-1st.co.uk>
Reply-To: IBM NetView Discussion <nv-l@tkg.com>
To: IBM NetView Discussion <nv-l@tkg.com>
Subject: Re: [NV-L] how to add Cisco traps to NV
Date: Fri, 31 Aug 2001 12:06:19 +0100
MIME-Version: 1.0
Received: from [198.3.130.68] by hotmail.com (3.2) with ESMTP id
MHotMailBD58BD5800B140043894C6038244CDEE0; Fri, 31 Aug 2001 04:17:47 -0700
Received: from localhost (daemon@localhost)by westlake.tkg.com (8.9.3/8.9.3)
with SMTP id GAA201272;Fri, 31 Aug 2001 06:10:05 -0500
Received: by westlake.tkg.com (bulk_mailer v1.12); Fri, 31 Aug 2001 06:08:46
-0500
Received: (from mjrdomo@localhost)by westlake.tkg.com (8.9.3/8.9.3) id
GAA166488for nv-l-outgoing; Fri, 31 Aug 2001 06:08:45 -0500
From owner-nv-l@tkg.com Fri, 31 Aug 2001 04:18:02 -0700
Message-ID: <3B8F6FAB.41BB2516@skills-1st.co.uk>
X-Mailer: Mozilla 4.77 [en] (WinNT; U)
X-Accept-Language: en
References: <F2196mlB5RRTEuHeqpv0000231c@hotmail.com>
Sender: owner-nv-l@tkg.com
Precedence: bulk

The Release Notes for NetView 6.0.1 and 6.0.2 document how to import
LOTS of Cisco trap definitions.  Basically, they are all shipped in
/usr/OV/newconfig/OVSNMP_RUN/trapd.conf.  Back up your live trapd.conf
and then run the nvaddtrapdconf utility to merge your existing trap
customisation with the Cisco stuff.

Cheers, Jane

--
Tivoli Certified Enterprise Consultant & Instructor
Skills 1st Limited, 2 Cedar Chase, Taplow, Bucks, SL6 0EU, UK
Tel: +44 (0)1628 782565
Copyright (c) 2001 Jane Curry <jane.curry@skills-1st.co.uk>.  All rights
reserved.


_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l


_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp

_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l