nv-l
[Top] [All Lists]

Disply scope in NetView 7.1

To: nv-l@lists.tivoli.com
Subject: Disply scope in NetView 7.1
From: BAUDOUX BERNARD <bernard.baudoux@fortisbank.com>
Date: Thu, 25 Oct 2001 11:23:17 +0200
Hello,

the page 6 of the slides states that "Initially, Scoping is subnetwork (and 
Location) based."
The example shown on the same slide is "69.0.254.5" which does not look like a 
subnet but well like a host address.

Does this implies there is a possibility to restrict the display on a per 
address basis ?   That would be a very fine feature I would be interested in a 
lot !

Thanks in advance for you answer.
Bernard Baudoux
Phone: +32 (0)2/565.24.68
e-mail : bernard.baudoux@fortisbank.com



This email and any attached files are confidential and may be legally 
privileged.
If you are not the intended recipient, any disclosure, reproduction, 
copying, distribution, or other dissemination or use of this communication 
is strictly prohibited.  
If you have received this transmission in error please notify the sender 
immediately and then delete this email.
Email transmission cannot be guaranteed to be secure or error free as 
information could be intercepted, corrupted, lost, destroyed, arrive late or 
incomplete, or contain viruses.  
The sender therefore is in no way liable for any errors or omissions in the 
content of this message, which may arise as a result of email transmission. 
If verification is required, please request a hard copy.


<Prev in Thread] Current Thread [Next in Thread>

Archive operated by Skills 1st Ltd

See also: The NetView Web