Re: Disply scope in NetView 7.1

["Pam Geiger" <pgeiger@us.ibm.com>]

This is a multipart message in MIME format.

Hello Bernard, 

  Sorry, but no. At this time it is just subnetwork and location based. 

Pam
Please respond to IBM NetView Discussion <nv-l@tkg.com> 
Sent by:        owner-nv-l@tkg.com
To:     "'NETVIEW FORUM'" <nv-l@tkg.com>
cc: 
Subject:        [NV-L] Disply scope in NetView 7.1



Hello,

the page 6 of the slides states that "Initially, Scoping is subnetwork 
(and Location) based."
The example shown on the same slide is "69.0.254.5" which does not look 
like a subnet but well like a host address.

Does this implies there is a possibility to restrict the display on a per 
address basis ?   That would be a very fine feature I would be interested 
in a lot !

Thanks in advance for you answer.
Bernard Baudoux
Phone: +32 (0)2/565.24.68
e-mail : bernard.baudoux@fortisbank.com



This email and any attached files are confidential and may be legally 
privileged.
If you are not the intended recipient, any disclosure, reproduction,
copying, distribution, or other dissemination or use of this communication
is strictly prohibited.
If you have received this transmission in error please notify the sender
immediately and then delete this email.
Email transmission cannot be guaranteed to be secure or error free as
information could be intercepted, corrupted, lost, destroyed, arrive late 
or
incomplete, or contain viruses.
The sender therefore is in no way liable for any errors or omissions in 
the
content of this message, which may arise as a result of email 
transmission.
If verification is required, please request a hard copy.




_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l


Hello Bernard, 

  Sorry, but no. At this time it is just subnetwork and location based. 

Pam

Please respond to IBM NetView Discussion <nv-l@tkg.com>

Sent by:        owner-nv-l@tkg.com

To:        "'NETVIEW FORUM'" <nv-l@tkg.com>
cc:        
Subject:        [NV-L] Disply scope in NetView 7.1



Hello,

the page 6 of the slides states that "Initially, Scoping is subnetwork (and Location) based."
The example shown on the same slide is "69.0.254.5" which does not look like a subnet but well like a host address.

Does this implies there is a possibility to restrict the display on a per address basis ?   That would be a very fine feature I would be interested in a lot !

Thanks in advance for you answer.
Bernard Baudoux
Phone: +32 (0)2/565.24.68
e-mail : bernard.baudoux@fortisbank.com



This email and any attached files are confidential and may be legally privileged.
If you are not the intended recipient, any disclosure, reproduction,
copying, distribution, or other dissemination or use of this communication
is strictly prohibited.
If you have received this transmission in error please notify the sender
immediately and then delete this email.
Email transmission cannot be guaranteed to be secure or error free as
information could be intercepted, corrupted, lost, destroyed, arrive late or
incomplete, or contain viruses.
The sender therefore is in no way liable for any errors or omissions in the
content of this message, which may arise as a result of email transmission.
If verification is required, please request a hard copy.




_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l