nv-l
[Top] [All Lists]

RE: SNMP On Windows 2000

To: nv-l@lists.tivoli.com
Subject: RE: SNMP On Windows 2000
From: "Mahesh Tailor" <MTailor@carilion.com>
Date: Thu, 08 Nov 2001 14:48:49 -0500
Also check out http://snmpboy.rte.microsoft.com/. 

Mahesh

>>> Scott_Barr@csgsystems.com 11/08/01 02:37PM >>>
I looked at the host mib hrDevice processor stuff. Um, looks like junk to
me. (Percentage of time over the last minute that the CPU was not idle?) I'm
guessing its always going to be zero. 

-----Original Message-----
From: Barr, Scott [mailto:Scott_Barr@csgsystems.com] 
Sent: Thursday, November 08, 2001 12:47 PM
To: 'IBM NetView Discussion'
Subject: RE: [NV-L] SNMP On Windows 2000


The specific problem is how to get CPU utilization and memory/file system
data. 

James pointed out to me that the article I was reading mentioned the files
are on the NT 4.0 OS not win2k and they are no longer supported by Microsoft
(surprise surprise surprise)

I will take a look at these web sites, thanks for the input. I will try and
find that knowledge base article number.

-----Original Message-----
From: FINEOUT, KIRK [mailto:KFINEOUT@amica.com] 
Sent: Thursday, November 08, 2001 12:42 PM
To: 'IBM NetView Discussion'
Subject: RE: [NV-L] SNMP On Windows 2000


Hi Scott,
Here is a web site with a lot of SNMP information for Windows - Both NT4 and
W2K.
http://www.wtcs.org/snmp4tpc/ <http://www.wtcs.org/snmp4tpc/> 
 
Hope it helps answer your questions.

-----Original Message-----
From: Barr, Scott [mailto:Scott_Barr@csgsystems.com] 
Sent: Thursday, November 08, 2001 12:47 PM
To: IBM NetView Discussion (E-mail)
Subject: [NV-L] SNMP On Windows 2000


Anyone using SNMP on Win2K maybe answer a question?
 
The Microsoft Knowledge base article on SNMP under windows 2000 states that
you must copy the PERFMIB.DLL and PERFMIB.ini to the %system32% directory.
 
This file does NOT exist that I can find. How does one make a PERFMIB.DLL?
 
I am assuming, that since the file does not exist, there must be some
compile / build process our LAN guys don't know. 
 
Any help?
 
 
 
Scott Barr
Network Systems Engineer
CSG Systems
Phone: 402-431-7939
Fax: 402-431-7413
Email:  <mailto:Scott_Barr@csgsystems.com> Scott_Barr@csgsystems.com 
 
 



**********************************************************************
This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please notify
the sender and postmaster@amica.com.
**********************************************************************
 

_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l 
_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l 
_________________________________________________________________________


<Prev in Thread] Current Thread [Next in Thread>

Archive operated by Skills 1st Ltd

See also: The NetView Web