Helmut
I came across the same problem on NetView 6.0.2 / AIX 4.3.3.
Demandpoll fails with timeout but snmpwalk and demandpoll from web client
work fine.
It appears only on one node. It is Cisco router 4500. There is public
community string on the router.
Best regards
Josef
-----Original Message-----
From: helmut.schroeder.hs@bayer-ag.de
[mailto:helmut.schroeder.hs@bayer-ag.de]
Sent: Friday, November 09, 2001 12:50 PM
To: IBM NetView Discussion
Subject: [NV-L] demandpoll fails
Hi all,
on NetView 6.0.2 / AIX 4.3.3:
Node is partially discovered (via nodename in seedfile), but with no
interfaces
demandpoll fails with timeout but snmpwalk works fine:
tcpdump shows that both requests go to the same ip address
(name resolution is ok in both ways), the problem is that
snmpwalk sends the correct community and the demandpoll
sends no community string !? I thought they would use both the
same source to determine which community to use ?!
( xnmsnmpconf -resolv shows the correct community for ip address
and hostname ... cache was cleared)
Any ideas ? Thanks - Helmut
|