Re: Load Cisco MIBs/traps

[CHANCELLOR.D.ELLIS@customs.treas.gov]

This is a multipart message in MIME format.

Sorry I didn't include that before.

I am running 6.0.2 on AIX 4.3.3






"James Shanks" <jshanks@us.ibm.com>
Sent by: owner-nv-l@tkg.com
11/13/2001 04:39 PM
Please respond to IBM NetView Discussion

 
        To:     IBM NetView Discussion <nv-l@tkg.com>
        cc: 
        Subject:        Re: [NV-L] Load Cisco MIBs/traps


Do you have 6.0.1 or 6.0.2? 

Over 100 new Cisco trap defs were added to the default trapd.conf in 
/usr/OV/newconfig/OVSNMP-RUN/trapd.conf 
If you haven't done so already, you can get these added to your existing 
trapd.conf by running 
nvaddtrapdconf /usr/OV/newconfig/OVSNMP-RUN/trapd.conf 
and the merge will take place. 

Then you can see what other trap defs you need and work on those. 
You will have to add those manually or get the proper MIBs and run 
mib2trap.  But I would not try that until you have 6.0.2 installed as 
there are fixes you will need there.

James Shanks
Level 3 Support  for Tivoli NetView for UNIX and NT
Tivoli Software / IBM Software Group





CHANCELLOR.D.ELLIS@customs.treas.gov 
Sent by: owner-nv-l@tkg.com 
11/13/2001 04:08 PM 
Please respond to IBM NetView Discussion 
        
        To:        nv-l@tkg.com 
        cc:         
        Subject:        [NV-L] Load Cisco MIBs/traps 

 



I am sorry if this has been covered on the list already. 

What is the best way to load cisco MIBs? I have seen a script out there 
that was last updated sometime in late 1997. Is there something similar 
that is more recent? I need to format a large number traps for cisco and I 
am looking for the quickest way. I am hoping there is something out there 
that has all of the MIBs/trap definitions that will automate this step. 

TIA 




Sorry I didn't include that before.

I am running 6.0.2 on AIX 4.3.3

"James Shanks" <jshanks@us.ibm.com> Sent by: owner-nv-l@tkg.com 11/13/2001 04:39 PM Please respond to IBM NetView Discussion

To:        IBM NetView Discussion <nv-l@tkg.com>         cc:                 Subject:        Re: [NV-L] Load Cisco MIBs/traps

Do you have 6.0.1 or 6.0.2? 

Over 100 new Cisco trap defs were added to the default trapd.conf in /usr/OV/newconfig/OVSNMP-RUN/trapd.conf 
If you haven't done so already, you can get these added to your existing trapd.conf by running 
nvaddtrapdconf /usr/OV/newconfig/OVSNMP-RUN/trapd.conf 
and the merge will take place. 

Then you can see what other trap defs you need and work on those. 
You will have to add those manually or get the proper MIBs and run mib2trap.  But I would not try that until you have 6.0.2 installed as there are fixes you will need there.

James Shanks
Level 3 Support  for Tivoli NetView for UNIX and NT
Tivoli Software / IBM Software Group

CHANCELLOR.D.ELLIS@customs.treas.gov Sent by: owner-nv-l@tkg.com 11/13/2001 04:08 PM Please respond to IBM NetView Discussion

To:        nv-l@tkg.com        cc:                Subject:        [NV-L] Load Cisco MIBs/traps

I am sorry if this has been covered on the list already. 

What is the best way to load cisco MIBs? I have seen a script out there that was last updated sometime in late 1997. Is there something similar that is more recent? I need to format a large number traps for cisco and I am looking for the quickest way. I am hoping there is something out there that has all of the MIBs/trap definitions that will automate this step. 

TIA