Re: Load Cisco MIBs/traps

["James Shanks" <jshanks@us.ibm.com>]

This is a multipart message in MIME format.

I don't understand.
Does this mean you already did the nvaddtrapdconf or what?
If not, then do it.
If so, then you need to identify the additional Cisco MIBs you need and 
run mib2trap.
That's all there is, unless you are hoping some other soul who has already 
done this will send you his trapd.conf 

James Shanks
Level 3 Support  for Tivoli NetView for UNIX and NT
Tivoli Software / IBM Software Group
 





CHANCELLOR.D.ELLIS@customs.treas.gov
Sent by: owner-nv-l@tkg.com
11/13/2001 04:47 PM
Please respond to IBM NetView Discussion

 
        To:     IBM NetView Discussion <nv-l@tkg.com>
        cc: 
        Subject:        Re: [NV-L] Load Cisco MIBs/traps

 


Sorry I didn't include that before. 

I am running 6.0.2 on AIX 4.3.3 





"James Shanks" <jshanks@us.ibm.com> 
Sent by: owner-nv-l@tkg.com 
11/13/2001 04:39 PM 
Please respond to IBM NetView Discussion 
        
        To:        IBM NetView Discussion <nv-l@tkg.com> 
        cc:         
        Subject:        Re: [NV-L] Load Cisco MIBs/traps



Do you have 6.0.1 or 6.0.2? 

Over 100 new Cisco trap defs were added to the default trapd.conf in 
/usr/OV/newconfig/OVSNMP-RUN/trapd.conf 
If you haven't done so already, you can get these added to your existing 
trapd.conf by running 
nvaddtrapdconf /usr/OV/newconfig/OVSNMP-RUN/trapd.conf 
and the merge will take place. 

Then you can see what other trap defs you need and work on those. 
You will have to add those manually or get the proper MIBs and run 
mib2trap.  But I would not try that until you have 6.0.2 installed as 
there are fixes you will need there.

James Shanks
Level 3 Support  for Tivoli NetView for UNIX and NT
Tivoli Software / IBM Software Group




CHANCELLOR.D.ELLIS@customs.treas.gov 
Sent by: owner-nv-l@tkg.com 
11/13/2001 04:08 PM 
Please respond to IBM NetView Discussion 
        
       To:        nv-l@tkg.com 
       cc:         
       Subject:        [NV-L] Load Cisco MIBs/traps 

 




I am sorry if this has been covered on the list already. 

What is the best way to load cisco MIBs? I have seen a script out there 
that was last updated sometime in late 1997. Is there something similar 
that is more recent? I need to format a large number traps for cisco and I 
am looking for the quickest way. I am hoping there is something out there 
that has all of the MIBs/trap definitions that will automate this step. 

TIA 





I don't understand.
Does this mean you already did the nvaddtrapdconf or what?
If not, then do it.
If so, then you need to identify the additional Cisco MIBs you need and run mib2trap.
That's all there is, unless you are hoping some other soul who has already done this will send you his trapd.conf 

James Shanks
Level 3 Support  for Tivoli NetView for UNIX and NT
Tivoli Software / IBM Software Group

CHANCELLOR.D.ELLIS@customs.treas.gov Sent by: owner-nv-l@tkg.com 11/13/2001 04:47 PM Please respond to IBM NetView Discussion

To:        IBM NetView Discussion <nv-l@tkg.com>         cc:                 Subject:        Re: [NV-L] Load Cisco MIBs/traps

Sorry I didn't include that before. 

I am running 6.0.2 on AIX 4.3.3

"James Shanks" <jshanks@us.ibm.com> Sent by: owner-nv-l@tkg.com 11/13/2001 04:39 PM Please respond to IBM NetView Discussion

To:        IBM NetView Discussion <nv-l@tkg.com>        cc:                Subject:        Re: [NV-L] Load Cisco MIBs/traps

Do you have 6.0.1 or 6.0.2? 

Over 100 new Cisco trap defs were added to the default trapd.conf in /usr/OV/newconfig/OVSNMP-RUN/trapd.conf 
If you haven't done so already, you can get these added to your existing trapd.conf by running 
nvaddtrapdconf /usr/OV/newconfig/OVSNMP-RUN/trapd.conf 
and the merge will take place. 

Then you can see what other trap defs you need and work on those. 
You will have to add those manually or get the proper MIBs and run mib2trap.  But I would not try that until you have 6.0.2 installed as there are fixes you will need there.

James Shanks
Level 3 Support  for Tivoli NetView for UNIX and NT
Tivoli Software / IBM Software Group

CHANCELLOR.D.ELLIS@customs.treas.gov Sent by: owner-nv-l@tkg.com 11/13/2001 04:08 PM Please respond to IBM NetView Discussion

To:        nv-l@tkg.com       cc:               Subject:        [NV-L] Load Cisco MIBs/traps

I am sorry if this has been covered on the list already. 

What is the best way to load cisco MIBs? I have seen a script out there that was last updated sometime in late 1997. Is there something similar that is more recent? I need to format a large number traps for cisco and I am looking for the quickest way. I am hoping there is something out there that has all of the MIBs/trap definitions that will automate this step. 

TIA