Re: Tivoli NetView on Windows 2000

["James Shanks" <jshanks@us.ibm.com>]

This is a multipart message in MIME format.

I don't know what the problem could be.
SP2 was not available when 6.0.2 went out the door but has become the 
standard environment for NetView Verification ever since it became 
available.
All the test machines run with it.  7.1 was tested with it and 6.0.3 is 
being tested with it now.  No SP2-specific fixes were put into netmon, so 
I suspect that something else is wrong when you put it on.  I take it that 
you are certain that the SNMP service was working after you applied it?

James Shanks
Level 3 Support  for Tivoli NetView for UNIX and NT
Tivoli Software / IBM Software Group
 





awatthey@MMM.COM
Sent by: owner-nv-l@tkg.com
11/26/2001 07:25 AM
Please respond to IBM NetView Discussion

 
        To:     IBM NetView Discussion <nv-l@tkg.com>
        cc: 
        Subject:        [NV-L] Tivoli Netview on Windows 2000

 

I have Tivoli Netview 6.0.2 on W2K at service pack 1.

I recently upgrade to service pack 2 and discovery no longer seems to 
work.
I reset the database several times and it is consistent.

I backed out the service pack upgrade and it all works again.

Is this a known problem or have I done something wrong somewhere?  If 
there
are other users on SP2 then I will research further.

Alan.

_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l



I don't know what the problem could be.
SP2 was not available when 6.0.2 went out the door but has become the standard environment for NetView Verification ever since it became available.
All the test machines run with it.  7.1 was tested with it and 6.0.3 is being tested with it now.  No SP2-specific fixes were put into netmon, so I suspect that something else is wrong when you put it on.  I take it that you are certain that the SNMP service was working after you applied it?

James Shanks
Level 3 Support  for Tivoli NetView for UNIX and NT
Tivoli Software / IBM Software Group

awatthey@MMM.COM Sent by: owner-nv-l@tkg.com 11/26/2001 07:25 AM Please respond to IBM NetView Discussion

To:        IBM NetView Discussion <nv-l@tkg.com>         cc:                 Subject:        [NV-L] Tivoli Netview on Windows 2000

I have Tivoli Netview 6.0.2 on W2K at service pack 1.

I recently upgrade to service pack 2 and discovery no longer seems to work.
I reset the database several times and it is consistent.

I backed out the service pack upgrade and it all works again.

Is this a known problem or have I done something wrong somewhere?  If there
are other users on SP2 then I will research further.

Alan.

_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l