Thanks Stephen.
It works just fine. I had some problems with the "nvUtil a"
version of the command. It caused a problem with nvcold. I
reset nvcold and ran the command again and it worked.
Ray.
On Tue, 4 Dec 2001 10:29:35 -0600
"Stephen Hochstetler" <shochste@us.ibm.com> wrote:
> one more try. I needed to change the "=" to "~"
>
> /usr/OV/bin/nvUtil e \
> "((('SNMP sysObjectID'
> ~'1\.3\.6\.1\.4\.1\.9\.1\./13|17|18|110|113|114|122|26/')
> || \
> ('SNMP sysObjectID'
> ~'1\.3\.6\.1\.4\.1\.9\.1\./27|28|185|186|187|201|208|209/')
> && \
> (('IP Status'='Critical') || \
> ('IP Status'='Marginal')) && \
> ('isNode'=True))" "%IP Hostname%" > /tmp/txt
>
>
> Kind regards,
> Stephen Hochstetler shochste@us.ibm.com
> International Technical Support Organization - Austin
> Office - 512-436-8564 FAX -
> 512-436-8701
>
> ITSO redbooks at http://www.redbooks.ibm.com
>
> _________________________________________________________________________
> NV-L List information and Archives:
|