This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
Catalina,
Be sure that you have set the following.
Reset On Match - "List of Comparisons"
-----------------------------------------------
Attribute 1 ---- Attribute 2
2 Equal To 2
Query Smartset "Object Id Source" : 2
"2" represents the second varbind in the trap. In this case, the hostname.
I would move the Query Smartset between the Trap Node Down and the Reset on
Match
so that the timer does not get spawned unnecessarily.
Trap Node Down --> Query Smaretset --> Input 1
Hope this helps,
Don Davis
-----Original Message-----
From: CATALINA MARTINEZ [mailto:CATALINA.MARTINEZ@tlc.state.tx.us]
Sent: Monday, January 07, 2002 4:44 PM
To: nv-l@tkg.com
Subject: [NV-L] Rulesets
Hello All,
Running AIX 4.3.3 Netview 6.0.2
I created a ruleset that will execute a script (for a traceroute) if it
receives 3 sets of Nodes UP/DOWN from a node found in a Smartsets. When the
4th node down is received (before the 4th node up), execute the script.
On occassions, we get Node UP/DOWN from routers (frame relay). So I have
been told to monitor these routers and when the problem starts, capture the
data from a traceroute. The problem seems to be (right now) only one router
and it occurs everytime Netmon goes through its polling cycle. So every 5
min, we get a set of Interface down, node down, interface up, node up.
I have a smartset with all the routers (in question)are in it. The ruleset I
created is a follows (which is not working):
event--> trap Node Down Input 1 -> trap Node up Input 2 -> reset on match ->
query smartset (wan routers) -> threshold 3 / 1 hr -> action
I suppose I could do it for a particular node (for example, the one in
question right now) by using the Event Attributes but I really would like to
have it set up for that particular Smartset.
Any suggestions...
------------------------------------------------------------------------------
This electronic mail and any files transmitted with it are confidential and are
intended solely for the use of individual or entity to whom they are addressed.
If you are not the intended recipient or the person responsible for delivering
the electronic mail to the intended recipient, be advised that you have
received this electronic mail in error and that any use, dissemination,
forwarding, printing, or copying of this electronic mail is strictly
prohibited. If you have received this electronic mail in error, please
immediately notify the sender by return mail.
==============================================================================
|
Catalina,
Be sure that
you have set the following.
Reset On
Match - "List of Comparisons"
-----------------------------------------------
Attribute 1
---- Attribute 2
2 Equal
To 2
Query
Smartset "Object Id Source" : 2
"2"
represents the second varbind in the trap. In this case, the
hostname.
I would move
the Query Smartset between the Trap Node Down and the Reset on
Match
so that the
timer does not get spawned unnecessarily.
Trap Node
Down --> Query Smaretset --> Input 1
Hope this
helps,
Don
Davis
Hello All,
Running AIX 4.3.3 Netview 6.0.2
I created a ruleset that will execute a script (for a
traceroute) if it receives 3 sets of Nodes UP/DOWN from a node found in a
Smartsets. When the 4th node down is received (before the 4th node up),
execute the script.
On occassions, we get Node UP/DOWN from routers (frame
relay). So I have been told to monitor these routers and when the problem
starts, capture the data from a traceroute. The problem seems to be (right
now) only one router and it occurs everytime Netmon goes through its polling
cycle. So every 5 min, we get a set of Interface down, node down, interface
up, node up.
I have a smartset with all the routers (in question)are
in it. The ruleset I created is a follows (which is not working):
event--> trap Node Down Input 1 -> trap Node up Input
2 -> reset on match -> query smartset (wan routers) -> threshold
3 / 1 hr -> action
I suppose I could do it for a particular node (for example,
the one in question right now) by using the Event Attributes but I really
would like to have it set up for that particular Smartset.
Any suggestions...
------------------------------------------------------------------------------
This electronic mail and any files transmitted with it are confidential and are intended solely for the use of individual or entity to whom they are addressed. If you are not the intended recipient or the person responsible for delivering the electronic mail to the intended recipient, be advised that you have received this electronic mail in error and that any use, dissemination, forwarding, printing, or copying of this electronic mail is strictly prohibited. If you have received this electronic mail in error, please immediately notify the sender by return mail.
==============================================================================
|
|