Have you looked at RFC1213? That is where I got all of my information.
www.rfc.net
Also, it helps to walk the mib tree for a device to get some basic values to
make sure you are looking at the correct MIBs as well as the correct
interface (sub-interfaces).
Jason Allison
Principal Engineer
ARINC Incorporated
Office: (410) 266-2006
FAX: (410) 573-3026
-----Original Message-----
From: Enriquez,C-Raul,MEXICO,INFO [mailto:C-Raul.Enriquez@MX.NESTLE.com]
Sent: Wednesday, May 08, 2002 8:59 AM
To: 'Netview List'
Subject: [nv-l] Bandwidth utilization
Hello list:
I´m doing an analysis regarding the bandwith utilization in my network to
get some graphics, currently I have information from my serial links, but
I'm trying to get information from the LAN ports of the AS/400 and I don't
get any data.
I'm reading MIB variables IfSpeed, IfInOctects and IfOutOctects but I don't
get any information.
Any idea???
Thanks. Regards.
Carlos Enriquez
Systems Analyst
IS/Technical Support
Nestle Mexico, SA de CV
Phone: (52)55-5262-5546
email: c-raul.enriquez@mx.nestle.com
Welcome to:http://intranet.nestle.mx/informatica/
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
|