This document describes pulling it out of the CAM, via the dotq1bridge mib,
in
the dot1dTpFdbTable
http://www.cisco.com/warp/public/477/SNMP/cam_snmp.shtml#hw
Cordially,
Leslie A. Clark
IBM Global Services - Systems Mgmt & Networking
Detroit
"Davis, Donald"
<donald.davis@firstci To: "IBM NetView
Discussion (E-mail)" <nv-l@lists.tivoli.com>
tizens.com> cc:
Subject: [nv-l] [Cisco
Catalyst] A little off subject
05/21/2002 01:32 PM
Does anyone know how to determine the MAC address of the attached device on
a C6509 Catalyst switch?
I have walked the entire MIB without success. Is there something that needs
to be enabled on the switch first?
Thanks,
Don
=======================
Don Davis
First Citizens Bank
------------------------------------------------------------------------------
This electronic mail and any files transmitted with it are confidential and
are intended solely for the use of individual or entity to whom they are
addressed. If you are not the intended recipient or the person responsible
for delivering the electronic mail to the intended recipient, be advised
that you have received this electronic mail in error and that any use,
dissemination, forwarding, printing, or copying of this electronic mail is
strictly prohibited. If you have received this electronic mail in error,
please immediately notify the sender by return mail.
==============================================================================
|