Leslie,
I am going to be doing something very similar to this - migrating a Token
Ring based AIX (4.3.3) Netview server (6.01) to Ethernet (different IP
address) - at some point I'll also be upgrading this to Netview 7 too.
Are there any additional gotcha's you can think of when changing from token
ring to ethernet? Would I be better emplyed migrating to NV7 first before
migrating networks, or is it pretty much swings and roundabouts?
Many Thanks,
David McClelland
---------------------------
Tivoli Certified Consultant (TSM 4.1)
EMEA IGA Tivoli Systems Management Team
PanEMEA Infrastructure and Technology (PEI&T)
Mail: davidmcclelland@uk.ibm.com
Leslie Clark/Southfield/IBM@IBMUS on 08/07/2002 23:42:45
Please respond to Leslie Clark/Southfield/IBM@IBMUS
To: nv-l@lists.tivoli.com
cc:
Subject: Re: [nv-l] Netview Server IP address change
You can change the address without too much trouble. If you were thinking
of dropping the Framework, you can do it that way, too. This is what you
need
to do (notice most of the fuss is with Framework).
Change the ip address in Tivoli Framework:
odadmin odlist change_ip od <newaddr> FALSE
ovstop nvsecd
smitty tcpip, change the address (move cable, etc)
odadmin shutdown
change /etc/hosts, resolv.conf, snmpd.conf, etc
odadmin start
Test the change
odadmin odlist - should show the server as the managed node.
tivoli - start the desktop, should work.
show properties of the managed node - should show new address.
Change the ip address in Netview
ovstart nvsecd - minimum startup
/usr/OV/service/reset_ci
ovstart
open map
delete and rediscover node for management station, or demandpoll.
Test the change
Check that the node appears correctly in IP map, Managers map.
Check for errors in nettl log.
If MLM installed, check mlm group, topology, and smconfig.
Cordially,
Leslie A. Clark
IBM Global Services - Systems Mgmt & Networking
Detroit
"Regina King"
<rking@dss.state. To:
<nv-l@lists.tivoli.com>
la.us> cc:
Subject: [nv-l] Netview
Server IP address change
07/08/2002 09:38
AM
Our department is going to do a major move of equipment in August. One
piece of equipment that will be moved is the RS6000 box which runs Netview.
I have a couple questions in regards to this. There is the possiblity that
the current IP address for the RS6000 will be changed once the move takes
place because of additional Cisco 6509 (switch/routers) that will be
installed at the new location. I currently have AIX 4.3.3 and Netview
6.0.3 on Tivioli Framework. What kind of hoops do I need to do change IP
for Framework, OR can I install NEtview 7.0.1 without Framework with a new
IP?
Regina King, IT Support Specialist
LA Dept. of Social Services
rking@dss.state.la.us
225-342-4731
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
|