Thanks Leslie.
Now that you mention it, I have noticed that before in our TEC "View
Message" window.
Ray Westphal
Enterprise Rent-A-Car
-----Original Message-----
From: Leslie Clark [mailto:lclark@us.ibm.com]
Sent: Tuesday, September 24, 2002 7:08 PM
To: nv-l@lists.tivoli.com
Subject: RE: [nv-l] trapd.conf setup and ruleset configuration
Here's a loophole that might interest you. If you do not specify an event
class,
the event goes to tec with a class of nvserverd and the msg defaults to the
formatted event. I don't know how, but it is working for me. It will
probably
limit you in lots of horrible ways, though my tec skills are not fancy
enough
to be hurt by it.
Cordially,
Leslie A. Clark
IBM Global Services - Systems Mgmt & Networking
Detroit
"Westphal,
Raymond" To: James
Shanks/Raleigh/IBM@IBMUS
<RWestphal@erac.c cc:
nv-l@lists.tivoli.com
om> Subject: RE: [nv-l]
trapd.conf setup and ruleset configuration
09/24/2002 11:46
AM
Thanks James!
I feel better now.
-----Original Message-----
From: James Shanks [mailto:jshanks@us.ibm.com]
Sent: Tuesday, September 24, 2002 10:18 AM
To: Westphal, Raymond
Cc: nv-l@lists.tivoli.com
Subject: Re: [nv-l] trapd.conf setup and ruleset configuration
You haven't forgotten anything. There is no built-in mechanism to pass
the fixed text of the Event Log message defined in trapd.conf. That
function is not provided in nvcorrd. You'll have to provide your own
mechanism to obtain it.
James Shanks
Level 3 Support for Tivoli NetView for UNIX and NT
Tivoli Software / IBM Software Group
"Westphal, Raymond" <RWestphal@erac.com>
09/24/2002 11:09 AM
To: "NV List (E-mail)" <nv-l@lists.tivoli.com>
cc:
Subject: [nv-l] trapd.conf setup and ruleset configuration
Hello Everyone,
NetView 7.1.2 on AIX 4.3.3
This may be a dumb question but I cannot determine what I am doing wrong
or
what I am forgetting.
I manually created a new Enterprise in xnmtrap and then created 4 traps,
specific 1 through specific 4. In each of the traps I place some text in
"Event Log Message" field. For example, specific trap 1 contains "XYZ
service is down" specific trap 3 contains "XYZ service is up". I don't
include any other information in the "Event Log Message" field, such as
arguments or $E, $G etc. The traps appear in the event viewer and I can
get
paging to work with the Ruleset.
I'm trying to simplify the Ruleset so that I do not need to enter the text
to be included in the page. How do I pass the "Event Log message" text
from
trapd.conf into the Ruleset action node for paging? What is the NetView
environment variable? I have tried $NVATTR_1 through 8.
Thanks.
Ray Westphal
Enterprise Rent-A-Car
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
|