Hi Stephen ,
I need to manage 10 network with the same IP addresses, but from different
customers (addresses overlap) in one NetView .
Questions:
1. Do I need to use an AIX box for the CNAT machine? Can I use a Solaris one
for example?
2. Can I manage multiple subnets with the same IP Address range using the
same CNAT on the same machine ?
3. Do you know where can I find more detailed information about CNAT?
TIA,
Luiz
-----Original Message-----
From: Stephen Hochstetler
To: nv-l@lists.tivoli.com
Sent: 9/25/02 6:40 PM
Subject: Re: [nv-l] NetView and Cnat
Luiz,
Since CNAT is performing as a router, I don't see how it can talk to two
different overlapping address ranges. Am I mistaken by what you asked?
If you have two subnets that have overlapping ranges I thought you would
do
one of 2 options. Subnet A gets managed by NetView directly, subnet B
gets addresses changed by CNAT so they are no longer overlapping. Or,
you could put a CNAT in front of subnet A and a second CNAT in front of
subnet B. Their NATed networks would not be overlapping in the
configurations.
Kind regards,
Stephen Hochstetler shochste@us.ibm.com
International Technical Support Organization - Austin
Office - 512-436-8564 FAX - 512-436-9326
ITSO redbooks at http://www.redbooks.ibm.com
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
|