I don't know about the 2 way pagers, but this is our working configuration
for Skytel.
Carrier: skytel
Modem phone #: 1-800-679-2778
Numeric IDs accepted on modem line: N
DTMF phone #: 1-800-759-7243
Max. message length: 190
Max. digits in alphanumeric pager #: 8
Max. blocks/transaction: 1
Max. transactions/call: 7
Baud rate: 300
Parity: E
Data bits: 7
Stop bits: 1
Password:
Protocol: TAP
Scott Bursik
Event Systems Management
Pepsico Business Solutions Group
(972) 334-3757
scott.bursik@pbsg.com
-----Original Message-----
From: Milburn, Shane B [mailto:shane.b.milburn@intel.com]
Sent: Saturday, October 26, 2002 12:27 AM
To: 'nv-l@lists.tivoli.com'
Subject: [nv-l] nv.carriers and skytel
We are moving to the Skytel 2way pagers with the 10 digit pin (i.e
877588xxxx). I'm trying to get netview to page using this but I'm having
some problems.
I have the following settings in my nv.carriers.
Carrier: skytel
Modem phone #: 1-800-679-2778
Numeric IDs accepted on modem line: N
DTMF phone #: 1-800-759-7243
Max. message length: 500
Max. digits in alphanumeric pager #: 10
Max. blocks/transaction: 1
Max. transactions/call: 7
Baud rate: 300 <----(also tried 9600 for this
setting)
Parity: E
Data bits: 7
Stop bits: 1
Password:
Protocol: TAP
Then I issue the following command: nvpage 877588xxxx@skytel "test to shane"
But the page never makes it. If I send the same page to my metrocall page
from this system it works. So I know something is wrong with my nv.carriers
file but I'm not sure what.
Anyone have any ideas? I've also attached my nvpager.alog file. The
nvpager.errlog is empty so I didn't attach it.
Any help would be appreciated.
<<nvpagerd.ZIP>> <<nvpager.ZIP>>
thanks,
-shane
--
Shane B Milburn
Sr. Network Engineer & Unix/Network Domain Lead,
LTD Automation, Intel
Phone: 503.613.8501
Pager: 877-588-1327 or shane.b.milburn@skytel.com
Email: shane.b.milburn@intel.com
|