[Top] [All Lists]

Re: [nv-l] Messages: Different Link Address

To: nv-l@lists.tivoli.com
Subject: Re: [nv-l] Messages: Different Link Address
From: "Carlos Enriquez" <enriquezc@terra.com.mx>
Date: Wed, 2 Apr 2003 12:13:25 -0800
Delivered-to: mailing list nv-l@lists.tivoli.com
Delivery-date: Thu, 03 Apr 2003 13:10:28 +0100
Envelope-to: nv-l-archive@lists.skills-1st.co.uk
List-help: <mailto:nv-l-help@lists.tivoli.com>
List-post: <mailto:nv-l@lists.tivoli.com>
List-subscribe: <mailto:nv-l-subscribe@lists.tivoli.com>
List-unsubscribe: <mailto:nv-l-unsubscribe@lists.tivoli.com>
Mailing-list: contact nv-l-help@lists.tivoli.com; run by ezmlm
Hello Oliver:

Thanks for your response, I have made the change as the solution says:
SOLUTION: Go into serversetup, and change the netmon setting for "Ignore
source route bit in physical address" to "yes".
The configuration is as follows:

Type or select values in entry fields.
Press Enter AFTER making all desired changes.

                                                        [Entry Fields]
  Full name of sysObjectID file:                     [/usr/OV/conf/oid_to_type]

* Tracing mask:                                      [0]

  Full name of trace file:                           [/usr/OV/log/netmon.trace]

  Ring bit-swapping storage flag:                     none

  Secondary addressing support?                        yes

      (Will increase network traffic)
  Full name of seed file:                            [/usr/OV/conf/netmon.seed]

  Unnumbered IP address support?                       yes

  Speed node discovery?                               no

  Ignore source route bit in physical address?         yes

  Use IBM Tivoli NetView MLM for polling?             no

  Full name of IBM Tivoli NetView MLM seed file:     []

  Use IBM Tivoli NetView MLM for discovery?           no

  IBM Tivoli NetView MLM domain SmartSet prefix:     []
  Manage objects added by loadhosts?                  no

  Always use Alternate Community Names for polling?   no

  Range of automatic discovery:                       Local Subnet Only

  Router Fault Isolation Mode:                        RFI

  Router Fault Isolation: Treat ambiguous nonrespond  Unreachable

  router interfaces in unmanaged subnets as:

But it is NOT working fine, netview is still receiving a lot of the same
SNMP  messages, by the way the messages come from all type of devices not
only from Cisco devices....any idea what else to do???

Thansk. Regards


Carlos Enriquez

Encuentra los mejores productos y precios increibles!!
Aprovecha nuestra promoción a 12 pagos fijos con tarjetas Banamex
Tu tarjeta de Internet

To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com

This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)

<Prev in Thread] Current Thread [Next in Thread>

Archive operated by Skills 1st Ltd

See also: The NetView Web