I've looked for both (with and without the .sh) - I can't find it installed
on my system.
Brian
-----Original Message-----
From: Paul [mailto:pstroud@bellsouth.net]
Sent: Monday, July 28, 2003 8:15 AM
To: Brian W Green; netview list good
Subject: Re: [nv-l] Deletion of objects from normal topology DB
Its nvmaputil.sh
Paul
Brian W Green wrote:
>I have just tried to run nvmaputil, but it is not in my /usr/OV directory.
>Does anyone know where I can get it, if it is available for my system? I
am
>running NV 7.1.1 on AIX 4.3.3
>
>Thanks,
>
>Brian
>
>-----Original Message-----
>From: Paul [mailto:pstroud@bellsouth.net]
>Sent: Friday, July 25, 2003 5:50 PM
>To: Qureshi, Fawad
>Cc: Liew, Wen; nv-l@lists.tivoli.com
>Subject: Re: [nv-l] Deletion of objects from normal topology DB
>
>
>Fawad,
>Having netviewd up and running in read-write mode should fill the
>requirement.
>nvmaputil.sh was designed with netviewd in mind.
>
>Paul
>
>
>
>Qureshi, Fawad wrote:
>
>
>
>>No. Having netviewd up does not help.
>>
>>IBMers, any insight ??
>>
>>Fawad
>>
>>-----Original Message-----
>>From: Qureshi, Fawad [mailto:Fawad.Qureshi@ssa.gov]
>>Sent: Friday, July 25, 2003 3:04 PM
>>To: Liew, Wen
>>Cc: nv-l@lists.tivoli.com
>>Subject: RE: [nv-l] Deletion of objects from normal topology DB
>>
>>
>>we always keep a rw map open. I am not sure but maybe running netviewd can
>>eliminate this need. I am going to test this out real quick here.
>>
>>Fawad
>>
>>-----Original Message-----
>>From: Liew, Wen [mailto:Wen.Liew@atcoitek.com]
>>Sent: Friday, July 25, 2003 2:55 PM
>>To: nv-l@lists.tivoli.com
>>Subject: RE: [nv-l] Deletion of objects from normal topology DB
>>
>>
>>Thanks Fawad,
>>
>>nvmaputil works like a charm but is there a way to for this command to
>>function without a map being open? Am I correct to assume that there are
>>people out there with a RW map continuously open?
>>
>>WEN
>>
>>
>>-----Original Message-----
>>From: Qureshi, Fawad [mailto:Fawad.Qureshi@ssa.gov]
>>Sent: Friday, July 25, 2003 12:40 PM
>>To: Liew, Wen; nv-l@lists.tivoli.com
>>Subject: RE: [nv-l] Deletion of objects from normal topology DB
>>
>>
>>Wen,
>>
>>nvmaputil --delete <selection name>
>>
>>above will delete the object from command line. make sure you have a rw
map
>>open when you run this command, else it will fail.
>>
>>Fawad
>>
>>-----Original Message-----
>>From: Liew, Wen [mailto:Wen.Liew@atcoitek.com]
>>Sent: Friday, July 25, 2003 1:33 PM
>>To: nv-l@lists.tivoli.com
>>Subject: [nv-l] Deletion of objects from normal topology DB
>>
>>
>>
>>
>>Hi List,
>>
>>I am trying to automate some of the maintenance for Netview. Does anyone
>>know if there is a command line method of deleting objects from the normal
>>topology DB other than using the GUI?
>>
>>Thanks,
>> WEN
>>
>>
>>
>>
>>
>
>
>
>---------------------------------------------------------------------
>To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
>For additional commands, e-mail: nv-l-help@lists.tivoli.com
>
>*NOTE*
>This is not an Offical Tivoli Support forum. If you need immediate
>assistance from Tivoli please call the IBM Tivoli Software Group
>help line at 1-800-TIVOLI8(848-6548)
>
>
>
>
>
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
|