Fawad,
Having netviewd up and running in read-write mode should fill the
requirement.
nvmaputil.sh was designed with netviewd in mind.
Paul
Qureshi, Fawad wrote:
No. Having netviewd up does not help.
IBMers, any insight ??
Fawad
-----Original Message-----
From: Qureshi, Fawad [mailto:Fawad.Qureshi@ssa.gov]
Sent: Friday, July 25, 2003 3:04 PM
To: Liew, Wen
Cc: nv-l@lists.tivoli.com
Subject: RE: [nv-l] Deletion of objects from normal topology DB
we always keep a rw map open. I am not sure but maybe running netviewd can
eliminate this need. I am going to test this out real quick here.
Fawad
-----Original Message-----
From: Liew, Wen [mailto:Wen.Liew@atcoitek.com]
Sent: Friday, July 25, 2003 2:55 PM
To: nv-l@lists.tivoli.com
Subject: RE: [nv-l] Deletion of objects from normal topology DB
Thanks Fawad,
nvmaputil works like a charm but is there a way to for this command to
function without a map being open? Am I correct to assume that there are
people out there with a RW map continuously open?
WEN
-----Original Message-----
From: Qureshi, Fawad [mailto:Fawad.Qureshi@ssa.gov]
Sent: Friday, July 25, 2003 12:40 PM
To: Liew, Wen; nv-l@lists.tivoli.com
Subject: RE: [nv-l] Deletion of objects from normal topology DB
Wen,
nvmaputil --delete <selection name>
above will delete the object from command line. make sure you have a rw map
open when you run this command, else it will fail.
Fawad
-----Original Message-----
From: Liew, Wen [mailto:Wen.Liew@atcoitek.com]
Sent: Friday, July 25, 2003 1:33 PM
To: nv-l@lists.tivoli.com
Subject: [nv-l] Deletion of objects from normal topology DB
Hi List,
I am trying to automate some of the maintenance for Netview. Does anyone
know if there is a command line method of deleting objects from the normal
topology DB other than using the GUI?
Thanks,
WEN
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
|