Seems to me you should leave the entry as is.
The snmpCollect daemon checks on the MIB object data type and enters it in
the file.
The on line help says it will collect objects of type TimeTicks.
I do not have the Nokia MIB you are talking about but NV collects sysUpTime
from MIB-II without apparent problem, and enters its data type as TIMETICKS.
At 01:09 PM 15/08/2003 +0800, Haibo Yang wrote:
>John Bruer£¡
>
>I also noticed the TIMETICKS. This keyword, at the very beginning, was not
added by me. I presumed the snmpcollect made TIMETICKS keyword here. What I
put there is GAGUE, which shows among the output if a snmpget is conducted.
>
>And from the snmpcol.trace, the log will look like this if I put Gague as
the keyword:
>THUR. AUG 14 11:37:25 : Invalid type for MIB NokiaCPUUtility.0 node
10.10.30.200: 0x42 (need SNMPTIMETICKS).
>
>Right, maybe I should put SNMPTIMETICKS instead of TIMETICKS out there.
>
>Let me try.....
>
>
>Cordially
>
>Bruce Yang
>0086-755-26743243
>hbyang@sysway.com
>
>======= 2003-08-14 23:58:00 ÄúÔÚÀ´ÐÅÖÐдµÀ£º=======
>
>>"Haibo Yang" <hbyang@sysway.com> writes:
>>> Hello, list.
>>>
>>> Netview 7.1.3 on Win2000 Pro with Pack 2
>>
>>> MIB .1.3.6.1.4.1.94.1.21.1.7.1 0 NokiaCPUUtility units TIMETICKS R
ibmbackup
>>>
>>> C 10.10.30.200 0xffffffff 120 > 40.000000 <= 35.000000 s 58720263
>>
>>
>>> Hi John Bruer,
>>>
>>> Thank you for your help. From snmpcol.trace, there are really
>>> some useful information. I have noticed several log about
>>> collecting the specific NOKIA MIB value. But I don't understand
>>> it really, let alone how to debug it.
>>> ########### Beginning##########
>>> The log says:
>>> Thur. Aug 14 15:29:39 : Deferring SNMP collection of
>>> NokiaCPUUtility.0 on
>>> 10.10.30.200 60 minutes (1.00 hours). Consecutive deferral #1.
>>> ################ End #################
>>
>>I'm stretching now, but I have felt you pain in the past.
>>
>>You know, that keyword TIMETICKS in your conf doesn't look familiar to
>>me, and it's different from the other. I just checked my monitor for
>>that same OID for ipsoProcessorUtilization and it uses GAUGE as the
>>data type.
>>
>>I'm betting that if you replace TIMETICKS with GAUGE you'll please the
>>snmpCollect gods.
>>
>>When you change the file be sure to ovstop snmpCollect and ovstart
>>snmpCollect to recycle the daemon.
>>
>>Do all your other defined data collections work okay?
>>
>>
>>--
>>jb
>
>= = = = = = = = = = = = = = = = = = = =
>
>
>
>
>
>---------------------------------------------------------------------
>To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
>For additional commands, e-mail: nv-l-help@lists.tivoli.com
>
>*NOTE*
>This is not an Offical Tivoli Support forum. If you need immediate
>assistance from Tivoli please call the IBM Tivoli Software Group
>help line at 1-800-TIVOLI8(848-6548)
>
Joe Fernandez
Kardinia Software
jfernand@kardinia.com
http://www.kardinia.com
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
|